|
Items needed to complete a 4*120 ?
Hey all
I am off to purchase a SIG Four Star 120 some time soon. I live fairly far (About 85 miles) from my LHS and I would just like to know what additional items are required to complete the kit (Wheels, fuel tank etc.) Would hate go go back for something arbitrary that I have forgotten. I have a fairly good idea, got my shopping list, but any ideas are welcome. Marcel |
RE: Items needed to complete a 4*120 ?
Marcel,
This info is posted directly on [link=http://www.towerhobbies.com]Tower Hobbies Website[/link]. Here is what is included in the kit and what is needed to finish it. INCLUDES: All Wood to Build the Kit, Full Size Folded Plans, Photo Illustrated Instruction Manual, Pre-Formed 1/8" Thick Aluminum Main Gear, Decal Sheet, Pushrods, Tailwheel Wire Assembly, Complete Hardware Package, Reinforced-Nylon Engine Mount, Clear Canopy, Fiberglass Cloth and Sig Easy Hinges. REQUIRES: Engine: .90-1.20 (2-stroke) or 1.20-1.60 (4-stroke) Radio: 4 Channel w/5 Servos (4-High Torque) and Y-Harness Covering: Four 6 Foot Rolls Misc. Items: One 16oz Fuel Tank and Fuel Tubing, One 4" Lite Wheel, One 1 1/4" TailWheel, One 2 3/4" Spinner and Assorted Field and Building Equipment. Ken |
RE: Items needed to complete a 4*120 ?
Hello Ken
Thank you so much for the info, that helps. :D Marcel |
RE: Items needed to complete a 4*120 ?
It's a great plane. You'll love it!
You will probably want a pilot figure. Some people don't use the included pushrod and use a pull-pull setup for the rudder. In which case you will have to get the cables and hardware for that. Wheel collars of course. I can't think of anything else right now. You can see a picture of mine in my profile. |
| All times are GMT -8. The time now is 12:09 AM. |
Copyright © 2026 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.