Items needed to complete a 4*120 ?
09-02-2005 | 03:09 AM
#1
Thread Starter
Junior Member
Joined: Jun 2005
Posts: 27
Likes: 0
Received 0 Likes
on
0 Posts
From: Johannesburg, SOUTH AFRICA
Items needed to complete a 4*120 ?
Hey all
I am off to purchase a SIG Four Star 120 some time soon. I live fairly far (About 85 miles) from my LHS and I would just like to know what additional items are required to complete the kit (Wheels, fuel tank etc.) Would hate go go back for something arbitrary that I have forgotten. I have a fairly good idea, got my shopping list, but any ideas are welcome.
Marcel
I am off to purchase a SIG Four Star 120 some time soon. I live fairly far (About 85 miles) from my LHS and I would just like to know what additional items are required to complete the kit (Wheels, fuel tank etc.) Would hate go go back for something arbitrary that I have forgotten. I have a fairly good idea, got my shopping list, but any ideas are welcome.
Marcel
09-02-2005 | 09:05 AM
#2
RCU Forum Manager/Admin
My Feedback: (9)
RE: Items needed to complete a 4*120 ?
Marcel,
This info is posted directly on [link=http://www.towerhobbies.com]Tower Hobbies Website[/link]. Here is what is included in the kit and what is needed to finish it.
Hope this helps
Ken
This info is posted directly on [link=http://www.towerhobbies.com]Tower Hobbies Website[/link]. Here is what is included in the kit and what is needed to finish it.
INCLUDES: All Wood to Build the Kit, Full Size Folded Plans, Photo Illustrated
Instruction Manual, Pre-Formed 1/8" Thick Aluminum Main Gear,
Decal Sheet, Pushrods, Tailwheel Wire Assembly, Complete Hardware
Package, Reinforced-Nylon Engine Mount, Clear Canopy, Fiberglass
Cloth and Sig Easy Hinges.
REQUIRES: Engine: .90-1.20 (2-stroke) or 1.20-1.60 (4-stroke)
Radio: 4 Channel w/5 Servos (4-High Torque) and Y-Harness
Covering: Four 6 Foot Rolls
Misc. Items: One 16oz Fuel Tank and Fuel Tubing, One 4" Lite Wheel,
One 1 1/4" TailWheel, One 2 3/4" Spinner and Assorted Field and
Building Equipment.
Instruction Manual, Pre-Formed 1/8" Thick Aluminum Main Gear,
Decal Sheet, Pushrods, Tailwheel Wire Assembly, Complete Hardware
Package, Reinforced-Nylon Engine Mount, Clear Canopy, Fiberglass
Cloth and Sig Easy Hinges.
REQUIRES: Engine: .90-1.20 (2-stroke) or 1.20-1.60 (4-stroke)
Radio: 4 Channel w/5 Servos (4-High Torque) and Y-Harness
Covering: Four 6 Foot Rolls
Misc. Items: One 16oz Fuel Tank and Fuel Tubing, One 4" Lite Wheel,
One 1 1/4" TailWheel, One 2 3/4" Spinner and Assorted Field and
Building Equipment.
Ken
09-02-2005 | 09:20 AM
#4
My Feedback: (2)
Joined: Mar 2003
Posts: 334
Likes: 0
Received 0 Likes
on
0 Posts
From: Windsor,
CT
RE: Items needed to complete a 4*120 ?
It's a great plane. You'll love it!
You will probably want a pilot figure.
Some people don't use the included pushrod and use a pull-pull setup for the rudder. In which case you will have to get the cables and hardware for that.
Wheel collars of course. I can't think of anything else right now. You can see a picture of mine in my profile.
You will probably want a pilot figure.
Some people don't use the included pushrod and use a pull-pull setup for the rudder. In which case you will have to get the cables and hardware for that.
Wheel collars of course. I can't think of anything else right now. You can see a picture of mine in my profile.
