WW2 Storch
 

Looking to build a Flisher (sp?) Storch, a ww2 German observation plane.

Any one know of plans or kits that may be available. or if any one has built one, any tips :cool:

WW2 Storch
 

The only Fieseler Storch kit in production that I am aware of, which I happen to have, is the Mantua kit (Italian), 2meter wingspan, it has some concessions to scale to make it easier particularly the undercarriage struts, and the foam wings are too heavy from a dense foam covered in card so when I get around to building it I will replace these with built-up.

Very few full-size Storches remain, you probably know of the one in Fantasy of Flight near Kissimee though I am very doubtful of Kermit's claims about his Storch's history.

Harry

Storch
 

Thanks for reply -

I met with Kermit for a couple of hours when I went to his exhibits.

He was nice enough to go through the Storch from prop to tail feathers and showed me some interesting documentation.

He then rolled the plane out and flew it for the people out there.
That was impressive!!

If I don't find a suitable kit, He said he would give me a suitable three view and I'll scratch build one.

Now there is an American designer that can supply plans for a 83 and 92 WS. I don't have that info at my fingertips but when I do, do you want the address. No foam, all built-up and I believe he can also supply lazer cut parts.

Let me know -

Storch Plans
 

http://www.dreamsoft.com/jackbale/index2.htm

Don't have any experience with these plans but...
Steve

Try this
 

Turnkey RC list a Storch kit
http://www.turnkeyrc.com/

Up date us if you build it. I'm a fan of the plane as well
and might want to build one.

WW2 Storch
 

Will keep you posted -

WW2 Storch
 

Bob Holman sells plans, a laser cut kit, and very cool scale landing gear for a 1/5 scale 94" Storch. If you are interested I can dig up some additional information.

Cheers!

Galen

WW2 Storch
 

Thanks Galen -

If you have a web site or phone #, would appreciate it.

WW2 Storch
 

Here is what I have from Bob Holman himself:

Plan $35.00 + $5.0 postage
Cowl $35.00
Laser cut parts $150.00
Landing gear $210.00
Everything that I have comes to $510.00. Includes a material package of most of the sheet and strip.

.90 to 1.20 $ ST engines.

Has flown on a .80 4ST OK.

Bob Holman

www.angelfire.com/ct/bhplans

WW2 Storch
 

Galen -

Many thanks - will follow up - ;)

Galen:
 

Galen:


Old address for BH Plans. New address is
www.bhplans.com

The old address has some old information in it. Much of it all was changed about 7-8 months ago.

The Storch is about his most popular A/C


Wm.

WW2 Storch
 

Thanks for the new URL. I knew there was a better one, but I couldn't find it again...

Cheers!

Galen

WW2 Storch
 

Mantua Model has a Fiesler Storch Kit under the trade name Aviomodelli.

You can get one at www.internet-rc.com

WW2 Storch
 

Harold Osborne drew a set of Storch plans in 70" for a .40. I bought a semikit of it about two years ago on the old RCO. The plans are very nice, and it's your typical stringer and former construction. I recently saw a set on ebay go for $15. The link to the auction is:

http://cgi.ebay.com/ws/eBayISAPI.dll...789312352&rd=1

I think this seller may have the rights to produce copies of the plans, as I've seen him selling alot of Osbourn'e drawings.