Go Back  RCU Forums > RC Helicopters > Kyosho Helicopters
Reload this Page >

need help on my caliber30 loosing altitude

Community
Search
Notices
Kyosho Helicopters Discuss all Kyosho heli topics here.

need help on my caliber30 loosing altitude

Thread Tools
 
Search this Thread
 
Old 07-28-2003, 02:05 AM
  #1  
rlcb3113
Junior Member
Thread Starter
 
Join Date: Jul 2003
Location: Malaysia
Posts: 4
Likes: 0
Received 0 Likes on 0 Posts
Default need help on my caliber30 loosing altitude

Here is how it started as i was hovering, then as i full throttle i can hear the engine screaming but not my rotor head and loosing altitude. At first i thought it was the clutch so i disamble it and change the clutch liner, but it is still the same. Can anyone please help me. Your help would be greatly appreciated
Old 07-28-2003, 12:43 PM
  #2  
besunta
Member
 
Join Date: May 2003
Location: Porto, PORTUGAL
Posts: 39
Likes: 0
Received 0 Likes on 0 Posts
Default need help on my caliber30 loosing altitude

Maybe your clutch is to tight, you need to "open" it so that it touchs the liner.
Old 07-28-2003, 08:52 PM
  #3  
randy41
Senior Member
 
Join Date: May 2003
Location: Charlestown, IN
Posts: 585
Likes: 0
Received 0 Likes on 0 Posts
Default need help on my caliber30 loosing altitude

You might want to check the one way bearing
in the counter shaft. If its bad it will cause the
same symptoms.
Old 07-29-2003, 12:36 AM
  #4  
rlcb3113
Junior Member
Thread Starter
 
Join Date: Jul 2003
Location: Malaysia
Posts: 4
Likes: 0
Received 0 Likes on 0 Posts
Default need help on my caliber30 loosing altitude

thanks guys i will counter check.
Old 07-29-2003, 12:39 AM
  #5  
rlcb3113
Junior Member
Thread Starter
 
Join Date: Jul 2003
Location: Malaysia
Posts: 4
Likes: 0
Received 0 Likes on 0 Posts
Default need help on my caliber30 loosing altitude

By the way how do i check the one way bearing?
Old 07-30-2003, 03:20 AM
  #6  
davidj
 
davidj's Avatar
 
Join Date: Mar 2002
Location: Bellevue, WA
Posts: 343
Likes: 0
Received 0 Likes on 0 Posts
Default need help on my caliber30 loosing altitude

Just replace it and the shaft. A lot of these are going bad way to soon. Page 28 of the manual #6 shows how to do the operation.

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off



Contact Us - Archive - Advertising - Cookie Policy - Privacy Statement - Terms of Service -

Copyright © 2024 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.