Right FUEL - Help needed..
#1
Thread Starter

Joined: Jan 2003
Posts: 64
Likes: 0
Received 0 Likes
on
0 Posts
From: Sao PauloSP, BRAZIL
Hy.. i´ve got a gallon of Byron 15% nitro and it says 16 % Castor / synthetic oil (is that right?)
is that fuel good for running my Norvel 0.061????
Tnks
Rodrigo Meira
is that fuel good for running my Norvel 0.061????
Tnks
Rodrigo Meira
#2

Joined: Apr 2003
Posts: 588
Likes: 0
Received 0 Likes
on
0 Posts
From: Mesa, AZ
Norvel recommends against the Byron fuels. They say the Byron 1/2A blend is OK, but I do not think that is what you are talking about, is it?
Check out the Norvel website. They have lots of good information on fuels and proper engine procedures:
http://www.norvel.com/til/TechNote.T002.html
That will take you to the fuels page.
For what it is worth,
Spiro
Check out the Norvel website. They have lots of good information on fuels and proper engine procedures:
http://www.norvel.com/til/TechNote.T002.html
That will take you to the fuels page.
For what it is worth,
Spiro
#3

My Feedback: (49)
Joined: Jul 2002
Posts: 248
Likes: 0
Received 0 Likes
on
0 Posts
From: Oceanside,
CA
Im using YS/Saito 20/20 with excellent results. Have almost 1 gallon thru my Norvel 061 on the 20/20. Smooth idle and good power transition. Also, im still using the same glow plug since the start of using this fuel and am yet to adjust my needle valve.



