rpm arms
03-20-2007, 06:17 PM
#5
Senior Member
Join Date: May 2006
Location: Muskegon,
MI
Posts: 1,086
Likes: 0
Received 0 Likes
on
0 Posts
RE: rpm arms
He asked about camber, not shock's...
I would bottom them all out first, install them, then try for about 2.5 degree's if you have a gauge. Otherwise, eyeball them so that they are slightly tilted in.
I would bottom them all out first, install them, then try for about 2.5 degree's if you have a gauge. Otherwise, eyeball them so that they are slightly tilted in.
