Skymaster Hawk 100 RTF/BNF
09-24-2018 | 05:09 AM
#1
Thread Starter
Joined: Jul 2012
Posts: 59
Likes: 0
Received 0 Likes
on
0 Posts
From: West Palm Beach,
FL
Skymaster Hawk 100 RTF/BNF
--PRICE DROP--
Skymaster 1:4.75 Hawk 100
ATJ 160SV, 150 minutes Total Time
JR 8911HV all around
JR398HV servos operating Robart air valves for gear and door, UP valve on brake
12120 Powersafe RX, TM1000, GPS sensor, all batteries included
DX18/20 programming available
JR 370A gyros
Unilight LED's & controller
Wingbags
Wingtip missiles
Things you need to know:
-I am the third owner, previous owners and plane history are known to me.
-No repair, damage, or replacement history on this model, but it's been flown and enjoyed so it shows typical for use.
-Speedbrake option in the tail is not installed, but its cut and prepped for it.
-There is a small chip missing from the canopy hoop, currently, a piece of electrical tape hides this.
-Typical paint cracks on the aft belly from the light layup flexing when resting on a fender stand for assembly. best to spread the weight over a larger area.
-I bought it and thought I'll yank out those old gyros for a cortex, but they are dialed in and the plane feels great with them really just as good as any of my other planes with a cortex.
Model is in S. Florida 33401. I can crate and ship worldwide at buyers expense.
Not interested in trades.
$6,750 BNF
Final Note- I have no clue with the revised RCU classifieds where my Trader feedback has gone, I'm not new to this and have bought and sold several jets on RCU
Skymaster 1:4.75 Hawk 100
ATJ 160SV, 150 minutes Total Time
JR 8911HV all around
JR398HV servos operating Robart air valves for gear and door, UP valve on brake
12120 Powersafe RX, TM1000, GPS sensor, all batteries included
DX18/20 programming available
JR 370A gyros
Unilight LED's & controller
Wingbags
Wingtip missiles
Things you need to know:
-I am the third owner, previous owners and plane history are known to me.
-No repair, damage, or replacement history on this model, but it's been flown and enjoyed so it shows typical for use.
-Speedbrake option in the tail is not installed, but its cut and prepped for it.
-There is a small chip missing from the canopy hoop, currently, a piece of electrical tape hides this.
-Typical paint cracks on the aft belly from the light layup flexing when resting on a fender stand for assembly. best to spread the weight over a larger area.
-I bought it and thought I'll yank out those old gyros for a cortex, but they are dialed in and the plane feels great with them really just as good as any of my other planes with a cortex.
Model is in S. Florida 33401. I can crate and ship worldwide at buyers expense.
Not interested in trades.
$6,750 BNF
Final Note- I have no clue with the revised RCU classifieds where my Trader feedback has gone, I'm not new to this and have bought and sold several jets on RCU
Last edited by kohersh; 10-05-2018 at 09:12 AM.
09-24-2018 | 06:44 PM
#2
My Feedback: (36)
Joined: Nov 2008
Posts: 97
Likes: 0
Received 0 Likes
on
0 Posts
From: Palm Beach, FL
FYI-Hans is personally known to me and I can absolutely vouch for him. I have flown this model on several occasions and it is absolutely on rails! This model was originally built and owned by Peter Goldsmith and it is exactly as he assembled it. Buy with confidence!
