Hi All. Long time RC pilot here first time quad builder. I bought a Flight Test Tiny Whoop SE and built it this morning. I had it setup and flying but it was a little jumpy, I wanted to find a way to adjust flight modes. So I downloaded Emuflight and really screwed things up.

I decided to try to update the firmware on the board (but not sure if this was done correctly). Now the Tx wont bind to the board and I've lost all the default setup.

HELP! I just want to restore defaults for the flite test setup but they aren't open until M-F 9-5



Flight test Tiny Whoop: https://store.flitetest.com/ft-tiny-whoop-se/

Flight Controller: board says "BeecoreX FR V1.0" and flight test calls it "F4 BeeCore FRSky Flight Controller with built in VTX (Preprogrammed with EmuFight for T8 Lite"

using a radiomaster T8 lite.

Figured it out. I figured out the CLI and dumped it but was not typing "save" before exiting so the default setup wasnt even making it to the flight controller.