mvvs .61
06-01-2006 | 03:27 AM
#1
Thread Starter
Joined: Jul 2003
Posts: 77
Likes: 0
Received 0 Likes
on
0 Posts
From: mumbai, INDIA
mvvs .61
Hi,
Planning to use the MVVS .61 with the tuned muffler on the seagull models razzle for 3 d flying.
1. would the engine have adequate power ?
2. if so what prop sizes are recommended ?
Thanks
Planning to use the MVVS .61 with the tuned muffler on the seagull models razzle for 3 d flying.
1. would the engine have adequate power ?
2. if so what prop sizes are recommended ?
Thanks
06-01-2006 | 03:48 AM
#2
Senior Member
RE: mvvs .61
Rajeev,
This engine would make adequate power for this model, for normal 3-D.
However, for extreme 3-D flying, the producer of this kit recommends a powerful .91 engine.
I believe the .91 from MVVS would be a better choice, since it has the same weight, but spins larger props with more authority.
I would recommend a 14x6 with the .61 and a 16x5 with the .91.
This engine would make adequate power for this model, for normal 3-D.
However, for extreme 3-D flying, the producer of this kit recommends a powerful .91 engine.
I believe the .91 from MVVS would be a better choice, since it has the same weight, but spins larger props with more authority.
I would recommend a 14x6 with the .61 and a 16x5 with the .91.
