Raiden 400T Gearbox
#1
Thread Starter
Junior Member
Joined: Oct 2003
Posts: 14
Likes: 0
Received 0 Likes
on
0 Posts
From: Rio Rico,
AZ
Dear Nitroplanes Person,
I just bought 4 of the Raiden 400T motors you sell (3mm shaft)l.
Where do I get the 2.4:1 gears, gearbox, and 10 x 3.8 props shown in the performance data? I tried several searches of your site, but had no luck.
Thanks,
Tom Mitchell
Geared 2.4:1 Stats (obtained at 4907' feet)
Prop Volts Thrust oz. Amps RPM Pitch Speed MPH
8 x 6 12 13 oz. 5.8 Amps 7050 40
9 x 3.8 12 14 oz. 5 Amps 7200 26
9 x 7.5 12 15 oz. 8 Amps 6600 47
10 x 3.8 12 20 oz. 7.6 Amps 6630 24
10 x 7 12 24 oz. 11 Amps 6100 40
11 x 7 12 28 oz. 15 Amps 5500 36
I just bought 4 of the Raiden 400T motors you sell (3mm shaft)l.
Where do I get the 2.4:1 gears, gearbox, and 10 x 3.8 props shown in the performance data? I tried several searches of your site, but had no luck.
Thanks,
Tom Mitchell
Geared 2.4:1 Stats (obtained at 4907' feet)
Prop Volts Thrust oz. Amps RPM Pitch Speed MPH
8 x 6 12 13 oz. 5.8 Amps 7050 40
9 x 3.8 12 14 oz. 5 Amps 7200 26
9 x 7.5 12 15 oz. 8 Amps 6600 47
10 x 3.8 12 20 oz. 7.6 Amps 6630 24
10 x 7 12 24 oz. 11 Amps 6100 40
11 x 7 12 28 oz. 15 Amps 5500 36
#2
Many different vendors offer gearboxes with varying ratios for 400T... including Electrifly, Ultrafly, GWS, BPHobbies, etc.
APC Slo Flyer 10x3.8 props are usually used for 400T benchmarking along with the other sizes.
Again APC props are available all over the place.
APC Slo Flyer 10x3.8 props are usually used for 400T benchmarking along with the other sizes.
Again APC props are available all over the place.




