---

ORIGINAL: DemonDean

Thanks John for the reply to my eariler request. It however is not one I really need.
I need the larger version. This is the one http://www.quickworldwide.com/manuals/Giles202_67.pdf
Looking really for the CG point.
Thanks......Dean

---

---

ORIGINAL: Lil Hoss

Good Morning
How about the manual for the http://www.nitroplanes.com/yeul4643arfn.html. Please note that the upper wing does NOT attach to the fuse as shown in the picture on the model you sent me...... The brackets do not attach to the sides, they go thru the fuse

Thank you
Hoss

[email protected]

---

---

ORIGINAL: crashcraig

Thanks, my order number is 535934. I did get a reply back from Customer Support that someone would contact me as well.

---

---

ORIGINAL: ssnyder

I have a 50cc 2.2M Nitro Models Giant Scale Yak 54 3D ARF 81, Item: 90A183W that I bought on Black Friday. The manual included with this plane doesn't match the plane. I really don't need the manual except for balance point, Engine mounting, and suggested control throws. Can you please provide the correct manual or this information above.

Thanks
Steve

---

---

ORIGINAL: well behaved viking

Hey John, if I could get the manual for the Exceed F-35 [link]http://www.nitroplanes.com/frarecoedfrc.html[/link] I'd really appreciate it.

[email protected]

the order # was: 535194 if that helps. thanx!

---

---

ORIGINAL: THier

John,

I bought a 71" yak54 at a swap meet, I looked like the kit had never been disturbed,, heck it took me a week to get the plans unrolled:D. It had no manual, I was guessing the plans were all it came with. Is there a manual avail for it? How do I get it?

Thanks,
Tom
[email protected]

---

---

ORIGINAL: I-fly-any-and-all

Do you have the manual with the reccommended control throws, center of gravity, and reccommended servo size for the CMPRO 70 inch hell cat?
here is the link to the plane: http://www.nitroplanes.com/hellcats.html

---

---

ORIGINAL: van_gogh

Hi John ( Nitro Models )

Also looking for the user manual for the Breitling Cap 232-60R - noted that you had sent one off to Helio Amaral, who I tried to contacct over the net with no response.

Could you please forward copy of manual to;

[email protected]

Cheers Carey

---

---

ORIGINAL: saintcreed

John, picked up your Katana 50CC at a local swap meet, but the manual is missing...all I really need is the CG location...I've tried every CG chart and I think I have it about right, but before the maiden I'd like to be sure...I'm at a conservative 5.75" back from the leading edge at the wing root..thanks rlg

---

---

ORIGINAL: CDN-uavpilot

Hello,
I am looking for the recommended cg range and control surface throws for the Extra 330L. Thanks.

Frank

---

---

ORIGINAL: trainwreck32

Hi John,

I am building the B25 Mitchell http://www.nitroplanes.com/sibmi5271mut.html that I bought from a friend who decided not to build it but I don't have the manual for it. Could you please send me a manual? Email is [email protected]

Thanks!

---