RE: Manuals for Nitromodels
 

I need a manual for the Bobcat 50.  Throws, CoG, and so forth.  Anyone got a URL to same?

RE: Manuals for Nitromodels
 

John you told me that you would send me a manual on the Lancair 120 I didn't get it , thats why I bought 3 planes... NO manuals....

SO does anyone have a manual on the Lancair 120 RC 71" model in a PDF form I need one ASAP!!!</p>

RE: Manuals for Nitromodels
 

Is it possible to get a manual for a Giles 202-140, or at least the CG and throws?

Dave

RE: Manuals for Nitromodels
 

Please see here: http://www.quickworldwide.com/manuals/Giles202_67.pdf

John
Nitro Planes

RE: Manuals for Nitromodels
 

Hello,

I bought a ARF Kit of the Edge 540 25 size a couple months ago from Nitroplanes.com but did not open it until now due to time issues. Today, when I opened the box, I found the manual missing from the kit. Now I have no way to assemble the kit as I am not familiar with the plane or aerobatic models at all. If anyone could send them electronically to me I would be much appreciative. ([email protected])

P.S. the kit I bought is this one: http://www.nitroplanes.com/newreded5402.html

Thanks,
Kevin

RE: Manuals for Nitromodels
 

Is there a better manual for the F-4E Phantom Radio Ready kit than the one included? The one I have is only like 4 pages and only has one page of instructional little pictures.

RE: Manuals for Nitromodels
 

Nope that's it.

While very terse, someone with a good bit of RC experience usually only needs the C.G. to work with.
If you are having difficulty, try contacting your local RC club. Usually members are happy to help.

RE: Manuals for Nitromodels
 

I'm in desprate need of the CG for NitroModelCAP 60 http://www.nitroplanes.com/brcap2326063.html
I'm going flying Sunday and I'm very unsure of the CG. Everything else is done and all I need to figure out is CG. I've got 3 servo's in the tail so I'm afraid it's going to be tail heavy but just not sure. Currently I measured my friends Kyosho CAP 32 looks almost identical and his CG is about 4 1/2" from LE and thats where I balanced mine. If somone could send me manual as my manual does NOT have CG info in it. Please email to [email protected]

Thanks!

RE: Manuals for Nitromodels
 

John,
I have been attempting to get Customer Support for a few days now... I need information on the T 34.... I would like to see a manual and need to know what extras I need to complete the build, ie, spinner, clevis, ect (less motor and electronics)

RE: Manuals for Nitromodels
 

John,

I will be receiving a Nitro models A6M5 Zero 120, could you forward a copy of the build manual in PDF to [email protected]

Brad

RE: Manuals for Nitromodels
 

Please see here: http://www.quickworldwide.com/Zero71.pdf

John
Nitro Planes

RE: Manuals for Nitromodels
 

Hello Nitro Models,
I recently purchased the Nitro Models Extra 330 90 size and wanted to put this plane together myself. I have paid to have my other planes put together and figured it is time for me to learn. I looked at the instructions and they are not very clear. I was wondering if a little more detailed instructions exist for this plane? I thank you for your time and consideration.

http://www.nitroplanes.com/ex3309063arf.html

RE: Manuals for Nitromodels
 

Nope, the only manual is the included one.

I would not tackle this as your first unassisted ARF.

RE: Manuals for Nitromodels
 

John, looking for manual on CMPro Edge540T 2000mm http://www.nitroplanes.com/edge-540t...-rc-plane.html

Please send to [email protected]

Thanks

RE: Manuals for Nitromodels
 

I need the manual for the Extra 90 - 63

RE: Manuals for Nitromodels
 

I need a manaul for this http://www.nitroplanes.com/cmpyak54arf1.html !!!

Thanks

[email protected]

RE: Manuals for Nitromodels
 

There IS NO manual for that YAK 54 ( I have the same plane ).

Like many Asian ARF's ( such as KMP, etc. ) it only comes with that sheet which looks like a parts breakout / blueprint.

That's it!

There is a big build thread around here for it though.

RE: Manuals for Nitromodels
 

Let me put it into the system and I'll email it to you.

John
Nitro Planes

RE: Manuals for Nitromodels
 

Jose is correct on this one. The manual is the big sheet that came with the plane. I've emailed that one to you.

John
Nitro Planes

RE: Manuals for Nitromodels
 

That works for me, Thank You very much. Could I get a new cowl for that???

jrp124

RE: Manuals for Nitromodels
 

what's your order number?

John
Nitro Planes

RE: Manuals for Nitromodels
 

I got it from a club member he cut the cowl up pretty bad. I would like to buy a new one!!!
Thanks for your reply
The plane has never been flown!!!

jrp124

RE: Manuals for Nitromodels
 

John,

Is there a manual for the 80" Zero by CMP....?? I'd sure like to have one...

Please let me know.

Thanks

Larry
[email protected]

RE: Manuals for Nitromodels
 

Hey John, you may just want to post a link to the master list, http://www.quickworldwide.com/manuals/ have em look there first. If it's not yet on the site, then they could ask for your assistance.
Would save you a lotta time pointing them to the individual listing over and over. ;)

And thanks for all your help before. :D

Merry Christmas!
Brad

RE: Manuals for Nitromodels
 

John.
I've got a question that several hours of research haven't been able to resolve till I found this thread on RCU.
I have what "appears" to be a knock-off CMP sport trainer 40 that looks identical to the one that NitroPlanes sells (Item# 90A123R_TrainerSport40-Red), right down to the covering scheme and has the same physical dimensions.

It has a manuel, but there are no "company" or mfg names to be found in it.
The problem is in that there are two different figures given for the CG. one drawing shows the cut-thru of the wing chord and says 93mm from the LE to the cg point, but in the written instructons on the same page it says 62mm ( about 25% of the chord). can you tell me what YOUR instructions say is the correct mesurment?

Thanks ever so much for your help. With this info, the plane will have a fighting chance of staying in the air.
Jeff Bigelow
Stockton, Ca.