O.S. 50 SX carb
#1
Member
Thread Starter
Join Date: Nov 2002
Location: el sobrante,
CA
Posts: 75
Likes: 0
Received 0 Likes
on
0 Posts
O.S. 50 SX carb
I just got a new 50SX from Tower Hobbies and in the box was a notice that stated, " This engine has its carburettor lightly fitted into its intake boss, as delivered. Secure it referring to the engine's instructions."
The screw that holds the carb retainer seems very tight already and there is no reference to this procedure in the Owner's Instruction Manual.
What's up?!!!
The screw that holds the carb retainer seems very tight already and there is no reference to this procedure in the Owner's Instruction Manual.
What's up?!!!
#2
Junior Member
My Feedback: (2)
Join Date: Oct 2002
Location: Sunrise,
FL
Posts: 2
Likes: 0
Received 0 Likes
on
0 Posts
O.S. 50 SX carb
Hi Big Mike
I just bought new OS 50 SX from Hong Kong. The screw that holds the carb retainer seems very tight , but there was no notice in the box.I thing that is Tower Hobbies Notice not from OS. If you want I can check from OS Engine Co.in OSAKA,Japan.as Airline Pilot I will be flying there soon. Thanks . Zee
I just bought new OS 50 SX from Hong Kong. The screw that holds the carb retainer seems very tight , but there was no notice in the box.I thing that is Tower Hobbies Notice not from OS. If you want I can check from OS Engine Co.in OSAKA,Japan.as Airline Pilot I will be flying there soon. Thanks . Zee
#6
Senior Member
Join Date: Apr 2002
Location: ----, NETHERLANDS
Posts: 367
Likes: 0
Received 0 Likes
on
0 Posts
O.S. 50 SX carb
My carb was completely LOOSE when I received the engine from Cyberheli. It just would fall off. Probably they don't attach it in factory but some retailers check and fasten it before selling?