THE LOUNGE 2
#2752
RE: THE LOUNGE 2
Very nice!! Twin Sport Tune would be good!!
If I get a Clod, I'd run that... if I want to keep the Clod stock!
ORIGINAL: paintstikker
Here's the Tamyia double motor ESC. I dunno the voltage input though, by the price I don't think it will handle 14.4v. If it does that's a scawheet deal! (assuming it will sell for 50-60 dollars).
http://www.tamiyausa.com/product/ite...oduct-id=45037
Here's the Tamyia double motor ESC. I dunno the voltage input though, by the price I don't think it will handle 14.4v. If it does that's a scawheet deal! (assuming it will sell for 50-60 dollars).
http://www.tamiyausa.com/product/ite...oduct-id=45037
#2755
RE: THE LOUNGE 2
NICE! Are you going to get it for your F-1s?!
ORIGINAL: lee172
i also never knew Tamiya made a rear light kit for the F1's (F101/102/103)
check here for the wheels.. http://www.hpiracing.com/hpiwheels
i also never knew Tamiya made a rear light kit for the F1's (F101/102/103)
check here for the wheels.. http://www.hpiracing.com/hpiwheels
#2756
Senior Member
Join Date: Nov 2006
Location: Stockton-on-TeesEngland, UNITED KINGDOM
Posts: 5,476
Likes: 0
Received 0 Likes
on
0 Posts
RE: THE LOUNGE 2
ORIGINAL: Lunchboxer
Gonna order the trailer light kit soon, I think.. then I will finish the trailer.. LOL!!
F-350, not anytime soon..
Gonna order the trailer light kit soon, I think.. then I will finish the trailer.. LOL!!
F-350, not anytime soon..
#2757
Join Date: Sep 2006
Location: Midlands, UNITED KINGDOM
Posts: 8,217
Likes: 0
Received 0 Likes
on
0 Posts
RE: THE LOUNGE 2
i might, it would look pretty cool in dusky conditions,
ive got my sights set on a M-04L, though there's next to nothing about it on here, seems people aint a fan of it? i need bearings and i might bling it up with some options parts, but not yet, bank balance = nil
oh and the F103 RX i bought, turns out it has 257mm wheelbase and not 260mm! another one for the collection! [&:]
ive got my sights set on a M-04L, though there's next to nothing about it on here, seems people aint a fan of it? i need bearings and i might bling it up with some options parts, but not yet, bank balance = nil
oh and the F103 RX i bought, turns out it has 257mm wheelbase and not 260mm! another one for the collection! [&:]
#2758
Senior Member
My Feedback: (23)
Join Date: Mar 2004
Location: Oshkosh,
WI
Posts: 7,934
Likes: 0
Received 0 Likes
on
0 Posts
RE: THE LOUNGE 2
ORIGINAL: lee172
i might, it would look pretty cool in dusky conditions,
ive got my sights set on a M-04L, though there's next to nothing about it on here, seems people aint a fan of it? i need bearings and i might bling it up with some options parts, but not yet, bank balance = nil
oh and the F103 RX i bought, turns out it has 257mm wheelbase and not 260mm! another one for the collection! [&:]
i might, it would look pretty cool in dusky conditions,
ive got my sights set on a M-04L, though there's next to nothing about it on here, seems people aint a fan of it? i need bearings and i might bling it up with some options parts, but not yet, bank balance = nil
oh and the F103 RX i bought, turns out it has 257mm wheelbase and not 260mm! another one for the collection! [&:]
#2759
Senior Member
Join Date: Nov 2006
Location: Stockton-on-TeesEngland, UNITED KINGDOM
Posts: 5,476
Likes: 0
Received 0 Likes
on
0 Posts
RE: THE LOUNGE 2
ORIGINAL: lee172
i might, it would look pretty cool in dusky conditions,
ive got my sights set on a M-04L, though there's next to nothing about it on here, seems people aint a fan of it? i need bearings and i might bling it up with some options parts, but not yet, bank balance = nil
oh and the F103 RX i bought, turns out it has 257mm wheelbase and not 260mm! another one for the collection! [&:]
i might, it would look pretty cool in dusky conditions,
ive got my sights set on a M-04L, though there's next to nothing about it on here, seems people aint a fan of it? i need bearings and i might bling it up with some options parts, but not yet, bank balance = nil
oh and the F103 RX i bought, turns out it has 257mm wheelbase and not 260mm! another one for the collection! [&:]
does the light kit flash, like F1 cars?
#2760
Join Date: Sep 2006
Location: Midlands, UNITED KINGDOM
Posts: 8,217
Likes: 0
Received 0 Likes
on
0 Posts
RE: THE LOUNGE 2
not too sure on the F1 lights, but i will be getting that M-04L, it will take the place of my M-03L.
not even Tamiya have info about them lights! [&:]
not even Tamiya have info about them lights! [&:]
#2761
Thread Starter
Join Date: Jun 2006
Location: Glenview,
IL
Posts: 9,967
Likes: 0
Received 0 Likes
on
0 Posts
RE: THE LOUNGE 2
Went out to the airfield I used to fly at here at home. They made a few changes, but for the better.
Got some flights in and on the way home stopped in at the LHS. I found 30% Cool Power Heli fuel for $20 a gallon. It's $45 a gallon in CT so I bought a case. Heh, $90 vs $195, it was a no brainer. That's better than any Tower coupon!!!
Looks like you guys are busy with the cars which is good. I assume my 501X parts are waiting for me at home.
Unfortunately, my 501X body is MIA. No word from the painter for at least a month.[:@]
Also, saw another guy that has like $2000 into his Titan, but can only hover. Maybe I am doing it wrong?
Got some flights in and on the way home stopped in at the LHS. I found 30% Cool Power Heli fuel for $20 a gallon. It's $45 a gallon in CT so I bought a case. Heh, $90 vs $195, it was a no brainer. That's better than any Tower coupon!!!
Looks like you guys are busy with the cars which is good. I assume my 501X parts are waiting for me at home.
Unfortunately, my 501X body is MIA. No word from the painter for at least a month.[:@]
Also, saw another guy that has like $2000 into his Titan, but can only hover. Maybe I am doing it wrong?
#2763
Senior Member
Join Date: Jun 2007
Location: Austin, TX
Posts: 443
Likes: 0
Received 0 Likes
on
0 Posts
RE: THE LOUNGE 2
Planes, you crash, you tear out the engine, the servos, and the receiver, and throw the destroying plane in the trash. Buy a new one.
Helis, you crash, you go home crying, go into the garage, and tear the heli apart to see what broke, go online and order everything(start crying again when you see the total), and you wait. When the parts come, you install them, adjust everything, and go fly. Repeat process.
Helis, you crash, you go home crying, go into the garage, and tear the heli apart to see what broke, go online and order everything(start crying again when you see the total), and you wait. When the parts come, you install them, adjust everything, and go fly. Repeat process.
#2766
Senior Member
Join Date: Oct 2006
Location: Valley Springs,
CA
Posts: 4,897
Likes: 0
Received 0 Likes
on
0 Posts
RE: THE LOUNGE 2
I will never let anybody fly any of my planes or helis w/o verifying they can fly anymore lol.
Maybe I should just get a trainer box.
Maybe I should just get a trainer box.
#2767
Junior Member
Join Date: Aug 2007
Location: boulder,
CO
Posts: 3
Likes: 0
Received 0 Likes
on
0 Posts
RE: THE LOUNGE 2
Great news!!! The RC model kit maker who was a Finalist on American Inventor is being paired up with SPIN MASTER to make his HT RACER (remote control paper planes, cars, boats... anythings).
Ricky DeRennaux, an Oklahoma teacher and a Finalist on American Inventor is going to work with SPIN MASTER (maker of Air Hogs) to develop his HT RACERS kit.CERS kit. This paper rc model kit could actually make it onto the shelves soon! Check out his youtube.
http://www.youtube.com/watch?v=ZELPH5k7rhc
<object width="425" height="350"><param name="movie" value="http://www.youtube.com/v/ZELPH5k7rhc"></param><param name="wmode" value="transparent"></param><embed src="http://www.youtube.com/v/ZELPH5k7rhc" type="application/x-shockwave-flash" wmode="transparent" width="425" height="350"></embed></object>
Ricky DeRennaux, an Oklahoma teacher and a Finalist on American Inventor is going to work with SPIN MASTER (maker of Air Hogs) to develop his HT RACERS kit.CERS kit. This paper rc model kit could actually make it onto the shelves soon! Check out his youtube.
http://www.youtube.com/watch?v=ZELPH5k7rhc
<object width="425" height="350"><param name="movie" value="http://www.youtube.com/v/ZELPH5k7rhc"></param><param name="wmode" value="transparent"></param><embed src="http://www.youtube.com/v/ZELPH5k7rhc" type="application/x-shockwave-flash" wmode="transparent" width="425" height="350"></embed></object>
#2769
RE: THE LOUNGE 2
Why M-04L instead of M-03R.. ?!
ORIGINAL: lee172
not too sure on the F1 lights, but i will be getting that M-04L, it will take the place of my M-03L.
not even Tamiya have info about them lights! [&:]
not too sure on the F1 lights, but i will be getting that M-04L, it will take the place of my M-03L.
not even Tamiya have info about them lights! [&:]
#2770
Thread Starter
Join Date: Jun 2006
Location: Glenview,
IL
Posts: 9,967
Likes: 0
Received 0 Likes
on
0 Posts
RE: THE LOUNGE 2
ORIGINAL: Baja5BLST
Planes, you crash, you tear out the engine, the servos, and the receiver, and throw the destroying plane in the trash. Buy a new one.
Helis, you crash, you go home crying, go into the garage, and tear the heli apart to see what broke, go online and order everything(start crying again when you see the total), and you wait. When the parts come, you install them, adjust everything, and go fly. Repeat process.
Planes, you crash, you tear out the engine, the servos, and the receiver, and throw the destroying plane in the trash. Buy a new one.
Helis, you crash, you go home crying, go into the garage, and tear the heli apart to see what broke, go online and order everything(start crying again when you see the total), and you wait. When the parts come, you install them, adjust everything, and go fly. Repeat process.
Don't get me wrong, a minor crash can set you back at the minimum, $100.
#2774
Senior Member
Join Date: Oct 2006
Location: Valley Springs,
CA
Posts: 4,897
Likes: 0
Received 0 Likes
on
0 Posts
RE: THE LOUNGE 2
I need a IB4200 cell lol.
I was charging some new packs I built and one popped. I thought it was the birds drinking water till I saw liquid oozing from a cell lol. Anyway...
Anybody have one?
I was charging some new packs I built and one popped. I thought it was the birds drinking water till I saw liquid oozing from a cell lol. Anyway...
Anybody have one?