THE LOUNGE 2
06-10-2007, 10:34 AM
#301
Join Date: Mar 2007
Location: Sarasota, FL
Posts: 3,671
Likes: 0
Received 0 Likes
on
0 Posts
RE: THE LOUNGE 2
Well i know really nothign about electric and did not know there was waterproof esc. I figured he has some sorta seal over everyting... Which sounds like a pain in the ***** if to get it prefect.
06-10-2007, 01:14 PM
#303
Senior Member
Join Date: Jan 2007
Location: scottsdale, AZ
Posts: 2,432
Likes: 0
Received 0 Likes
on
0 Posts
RE: THE LOUNGE 2
I beleive some 'members' of the lounge recommened this esc to me one day. http://www2.towerhobbies.com/cgi-bin...?&I=LXUY14&P=7. I want to run a 13t motor on it but I have a rule that you should never run a 13t motor on a 13t esc. But is this esc good enough to handle a motor right on its limit?
Thanks.
P.S. Nice F1 car lee!
Thanks.
P.S. Nice F1 car lee!
06-10-2007, 02:33 PM
#305
RE: THE LOUNGE 2
Those LRP AI Runner series are waterproof.. you can run them under water if you want..
There are also others that's waterproof..
ORIGINAL: nick2618
Well i know really nothign about electric and did not know there was waterproof esc. I figured he has some sorta seal over everyting... Which sounds like a pain in the ***** if to get it prefect.
Well i know really nothign about electric and did not know there was waterproof esc. I figured he has some sorta seal over everyting... Which sounds like a pain in the ***** if to get it prefect.
06-10-2007, 02:36 PM
#306
RE: THE LOUNGE 2
Oh.. DOH!! Yeah, I remember now!!
Should bust out a Dremel and cut the pinion out.. ha!!
ORIGINAL: lee172
LB, had an issue with a stuck pinion, had to get the vice out! [>:]
LB, had an issue with a stuck pinion, had to get the vice out! [>:]
06-10-2007, 02:37 PM
#307
RE: THE LOUNGE 2
I have one.. but it is only pulling a Tamiya Sport Tune.. so it is obviously not stressing it.. so I can't comment on how well it will handle a 13T motor...
Good quality product, though.. Futaba... I also have a MC230CR..
ORIGINAL: Checkpointracer
I beleive some 'members' of the lounge recommened this esc to me one day. http://www2.towerhobbies.com/cgi-bin...?&I=LXUY14&P=7. I want to run a 13t motor on it but I have a rule that you should never run a 13t motor on a 13t esc. But is this esc good enough to handle a motor right on its limit?
Thanks.
P.S. Nice F1 car lee!
I beleive some 'members' of the lounge recommened this esc to me one day. http://www2.towerhobbies.com/cgi-bin...?&I=LXUY14&P=7. I want to run a 13t motor on it but I have a rule that you should never run a 13t motor on a 13t esc. But is this esc good enough to handle a motor right on its limit?
Thanks.
P.S. Nice F1 car lee!
06-10-2007, 10:59 PM
#313
Senior Member
My Feedback: (31)
Join Date: Jul 2005
Location: moundsville,
WV
Posts: 1,059
Likes: 0
Received 0 Likes
on
0 Posts
RE: THE LOUNGE 2
who wants to see a video of my digger in action? stock tamiya johnson motor... and nothing special at all.. ratshack 3300 dtx esc.. no name servo
http://s158.photobucket.com/albums/t...=diggerbig.flv
waddya think..
i have since the vid put a roar spec 27t race motor in it and it gained about 5mph im thinking about a 15x2 motor with an XRS for sheer retarded speed lol..
http://s158.photobucket.com/albums/t...=diggerbig.flv
waddya think..
i have since the vid put a roar spec 27t race motor in it and it gained about 5mph im thinking about a 15x2 motor with an XRS for sheer retarded speed lol..
06-10-2007, 11:07 PM
#314
RE: THE LOUNGE 2
Tim,
Looks pretty quick for a silvercan, eh?! Did you gear it up?!
ORIGINAL: turbotb0205
who wants to see a video of my digger in action? stock tamiya johnson motor... and nothing special at all.. ratshack 3300 dtx esc.. no name servo
http://s158.photobucket.com/albums/t...=diggerbig.flv
waddya think..
i have since the vid put a roar spec 27t race motor in it and it gained about 5mph im thinking about a 15x2 motor with an XRS for sheer retarded speed lol..
who wants to see a video of my digger in action? stock tamiya johnson motor... and nothing special at all.. ratshack 3300 dtx esc.. no name servo
http://s158.photobucket.com/albums/t...=diggerbig.flv
waddya think..
i have since the vid put a roar spec 27t race motor in it and it gained about 5mph im thinking about a 15x2 motor with an XRS for sheer retarded speed lol..
06-10-2007, 11:16 PM
#315
Senior Member
Join Date: Oct 2006
Location: Valley Springs,
CA
Posts: 4,897
Likes: 0
Received 0 Likes
on
0 Posts
RE: THE LOUNGE 2
I beleive some 'members' of the lounge recommened this esc to me one day. http://www2.towerhobbies.com/cgi-bin...?&I=LXUY14&P=7. I want to run a 13t motor on it but I have a rule that you should never run a 13t motor on a 13t esc. But is this esc good enough to handle a motor right on its limit?
06-10-2007, 11:58 PM
#317
RE: THE LOUNGE 2
LOL, the Dump Truck went up to $455, but still "reserve not met".. ha! What's up w/ that?!
It was like $215 at rcMart last year.. [:@] I was too late when I asked my friend to look for it.. ha!
It was like $215 at rcMart last year.. [:@] I was too late when I asked my friend to look for it.. ha!
06-11-2007, 12:05 AM
#318
Senior Member
Join Date: Oct 2006
Location: Valley Springs,
CA
Posts: 4,897
Likes: 0
Received 0 Likes
on
0 Posts
RE: THE LOUNGE 2
Funny story....
My friend walked into the LHS yesterday to buy a gear. While he was at it, he remembered I ordered a part, so he asked the person if the part came in yet, I ordered it. He barely started to say my name when the lady pulled out the part and said Brendan Raymundo, right?
I also scored an older era pede' from the local classifides for 10 bucks. No Tx, though, but I was fine. I ran it for like 10 min and the XL-1 went capluy...this shows why I shouldn't go against my Tamiya religion...
My friend walked into the LHS yesterday to buy a gear. While he was at it, he remembered I ordered a part, so he asked the person if the part came in yet, I ordered it. He barely started to say my name when the lady pulled out the part and said Brendan Raymundo, right?
I also scored an older era pede' from the local classifides for 10 bucks. No Tx, though, but I was fine. I ran it for like 10 min and the XL-1 went capluy...this shows why I shouldn't go against my Tamiya religion...
06-11-2007, 12:29 AM
#323
Senior Member
My Feedback: (31)
Join Date: Jul 2005
Location: moundsville,
WV
Posts: 1,059
Likes: 0
Received 0 Likes
on
0 Posts
RE: THE LOUNGE 2
its not technically a silver can lol... its the johnson stamped chrome finish tamiya motor on the nose of the motor it says johnson but the wiring is presoldered tamiya wire.. yellow/green with bullets.. the gearing there is 4.88-1 total direct drive solid rear axle with a 1.5 inch diameter tire thats why its so fast lol.. its a pan car with twin vertical plate chassis...
06-11-2007, 12:55 AM
#325
Senior Member
Join Date: Mar 2006
Location: san luis obispo,
CA
Posts: 2,194
Likes: 0
Received 0 Likes
on
0 Posts
RE: THE LOUNGE 2
nice e-maxx. did that also take a dip in the pools looks a little too clean
I wanted to put an LB sticker on my one of my emaxx's but i just couldn't do that. LBs name is now synonymous with tamiya and putting it on a traxxas just didn't seem right
I wanted to put an LB sticker on my one of my emaxx's but i just couldn't do that. LBs name is now synonymous with tamiya and putting it on a traxxas just didn't seem right
ORIGINAL: eddiebelanger
pics of e-maxx from today
pics of e-maxx from today