THE LOUNGE 2
#8226
Senior Member
Join Date: Nov 2006
Location: Stockton-on-TeesEngland, UNITED KINGDOM
Posts: 5,476
Likes: 0
Received 0 Likes
on
0 Posts
#8227
RE: THE LOUNGE 2
ORIGINAL: turbotb0205
new product alert WEEEEEE for anyone lookin for an UBER strong BEC for those big brushless conversion.. "or maybe auto and his giant scale airplanes"
http://www.hobbycity.com/hobbycity/s...idProduct=6233
ill be grabbing one or 2 for my brushless stuff to alleviate the extra strain of bec on high amp controllers..
new product alert WEEEEEE for anyone lookin for an UBER strong BEC for those big brushless conversion.. "or maybe auto and his giant scale airplanes"
http://www.hobbycity.com/hobbycity/s...idProduct=6233
ill be grabbing one or 2 for my brushless stuff to alleviate the extra strain of bec on high amp controllers..
#8228
RE: THE LOUNGE 2
ORIGINAL: []TEX[]
We all went over this once already with you!
Futaba 3PM
ORIGINAL: AutoXMan
Hey LB you are running on FM 75 mhz or did you switch over to 2.4? If FM what channel are you on, I am ordering the Futaba 3PM I believe. And it would be horrible if we were on the same frequency ha ha.
On another note, do you think this is a good radio fit for me? I do not race, I probably use my r/c's as much as LB, but I want to have somewhat decent equipment. I realize the 3pks has more functions, but I doubt I would use them.
Hey LB you are running on FM 75 mhz or did you switch over to 2.4? If FM what channel are you on, I am ordering the Futaba 3PM I believe. And it would be horrible if we were on the same frequency ha ha.
On another note, do you think this is a good radio fit for me? I do not race, I probably use my r/c's as much as LB, but I want to have somewhat decent equipment. I realize the 3pks has more functions, but I doubt I would use them.
Futaba 3PM
#8229
Join Date: Sep 2006
Location: Midlands, UNITED KINGDOM
Posts: 8,217
Likes: 0
Received 0 Likes
on
0 Posts
RE: THE LOUNGE 2
Hi Loungers! not been on here for what seems like ages.. too many unfinished products that i just cant be bothered with, plus there's another form of expense that has entered my life..
#8230
Senior Member
My Feedback: (1)
Join Date: Apr 2005
Location: manerville,
NY
Posts: 1,297
Likes: 0
Received 0 Likes
on
0 Posts
RE: THE LOUNGE 2
ORIGINAL: lee172
Hi Loungers! not been on here for what seems like ages.. too many unfinished products that i just cant be bothered with, plus there's another form of expense that has entered my life..
Hi Loungers! not been on here for what seems like ages.. too many unfinished products that i just cant be bothered with, plus there's another form of expense that has entered my life..
#8231
Senior Member
Join Date: Nov 2006
Location: Stockton-on-TeesEngland, UNITED KINGDOM
Posts: 5,476
Likes: 0
Received 0 Likes
on
0 Posts
RE: THE LOUNGE 2
ORIGINAL: lee172
Hi Loungers! not been on here for what seems like ages.. too many unfinished products that i just cant be bothered with, plus there's another form of expense that has entered my life..
Hi Loungers! not been on here for what seems like ages.. too many unfinished products that i just cant be bothered with, plus there's another form of expense that has entered my life..
you know where to send them projects if you dont want them
#8233
RE: THE LOUNGE 2
LOL, stop crashing...
Yeah, brushed motor.. silvercan or BL, remember?!
I guess I do have S600s and Titan 12T as well.. I like them big can motors!!
ORIGINAL: paintstikker
I don't think I should be touching my RCs for a while and just go back to plumbing, cause the amount of things I have broken in the past week is nuts....
3 motors have been fried (I think the only motors that haven't given me trouble are the good ol' sealed ones)
I broke a hub to the XR311...and it wasn't even being run.
I smashed a crystal somehow while I wasn't even running the car.
I stripped one spur gear, and how? The motor is in a set position how does it not mesh up right?
I can't find the tranny for the TXT....
Maybe I should not run anything over 3300mah in terms of batteries, cause I break everything when I give things POWER.
I don't think I should be touching my RCs for a while and just go back to plumbing, cause the amount of things I have broken in the past week is nuts....
3 motors have been fried (I think the only motors that haven't given me trouble are the good ol' sealed ones)
I broke a hub to the XR311...and it wasn't even being run.
I smashed a crystal somehow while I wasn't even running the car.
I stripped one spur gear, and how? The motor is in a set position how does it not mesh up right?
I can't find the tranny for the TXT....
Maybe I should not run anything over 3300mah in terms of batteries, cause I break everything when I give things POWER.
#8234
RE: THE LOUNGE 2
My TXT and Stadium Blitzer (and the Scalpel Pro, which is not being used) are on 2.4GHz..
The others are all still on 75MHz FM..
I think my channel are either 77 or 75...
I have the synth module on my 3PKS, though.. so I can change the channel on the fly... (as long as the RX that I use are the synth one..)
Only you can tell what's a good radio for you.. I like Futaba in general just because they feel like an instrument.. some other brands, while I am sure they are fine.. just look and feel like toys.. (some looks like a Transformer.. LOL!) From 3PM to 3PKS is a pretty big hike on price.. I say, unless you want all the flexibility in the world (you can swap in the 2.4GHz module, change to 75MHz synth module, re-program all the switches, etc.) a 3PM is probably perfectly fine..
I still have a 3PM as backup as well!
ORIGINAL: AutoXMan
Hey LB you are running on FM 75 mhz or did you switch over to 2.4? If FM what channel are you on, I am ordering the Futaba 3PM I believe. And it would be horrible if we were on the same frequency ha ha.
On another note, do you think this is a good radio fit for me? I do not race, I probably use my r/c's as much as LB, but I want to have somewhat decent equipment. I realize the 3pks has more functions, but I doubt I would use them.
Hey LB you are running on FM 75 mhz or did you switch over to 2.4? If FM what channel are you on, I am ordering the Futaba 3PM I believe. And it would be horrible if we were on the same frequency ha ha.
On another note, do you think this is a good radio fit for me? I do not race, I probably use my r/c's as much as LB, but I want to have somewhat decent equipment. I realize the 3pks has more functions, but I doubt I would use them.
#8235
RE: THE LOUNGE 2
You got a kid now?! Or??!
ORIGINAL: lee172
Hi Loungers! not been on here for what seems like ages.. too many unfinished products that i just cant be bothered with, plus there's another form of expense that has entered my life..
Hi Loungers! not been on here for what seems like ages.. too many unfinished products that i just cant be bothered with, plus there's another form of expense that has entered my life..
#8236
Senior Member
Join Date: Dec 2005
Location: Batavia,
IL
Posts: 10,314
Likes: 0
Received 0 Likes
on
0 Posts
RE: THE LOUNGE 2
...or a wife?!?
ORIGINAL: Lunchboxer
You got a kid now?! Or??!
You got a kid now?! Or??!
ORIGINAL: lee172
Hi Loungers! not been on here for what seems like ages.. too many unfinished products that i just cant be bothered with, plus there's another form of expense that has entered my life..
Hi Loungers! not been on here for what seems like ages.. too many unfinished products that i just cant be bothered with, plus there's another form of expense that has entered my life..
#8237
Senior Member
Join Date: Dec 2005
Location: Batavia,
IL
Posts: 10,314
Likes: 0
Received 0 Likes
on
0 Posts
RE: THE LOUNGE 2
Started painting the RX-8 body this weekend, got 2 coats on. Wow, this stuff really goes on light, seems like I'll need the whole can to make it good. LOL Guess I'm used to using black and that dark orange too much.
Didn't get a chance to take any pics of the TA05R in decent light now that I've got the electronics in...oops. Kinda forgot.
I did run it around a tad though, just a little to test it out. Wow, this thing is tight. Very sharp steering, and very quick (even on 6 cells) with the MM5700. It just wants to jump when you hit it. Nice grip on those tires for sure!
I can't wait to run it full bore w/the body on!
Didn't get a chance to take any pics of the TA05R in decent light now that I've got the electronics in...oops. Kinda forgot.
I did run it around a tad though, just a little to test it out. Wow, this thing is tight. Very sharp steering, and very quick (even on 6 cells) with the MM5700. It just wants to jump when you hit it. Nice grip on those tires for sure!
I can't wait to run it full bore w/the body on!
#8239
RE: THE LOUNGE 2
ORIGINAL: Lunchboxer
Sounds fun!! I haven't ran any of my on-road for a long time.. need to work on the TC4 FT a little bit so it doesn't feel neglected!
Sounds fun!! I haven't ran any of my on-road for a long time.. need to work on the TC4 FT a little bit so it doesn't feel neglected!
#8241
RE: THE LOUNGE 2
LB maybe you can ta ke your scapel? I might check it out if you go, I can convert my RC 18 B into a truck and get some foams (oh wait sayd you can use brushless and lipo D'oh)
But they have a spec class not sure if your scapel qualifies?
http://www.rcuniverse.com/forum/m_6411262/tm.htm
But they have a spec class not sure if your scapel qualifies?
http://www.rcuniverse.com/forum/m_6411262/tm.htm
#8242
RE: THE LOUNGE 2
LOL, I can run in Class 5, Open Pan Car....
I can't drive to save my life, though... ha! If I were to go, I need to start running mine now... to get some practice, ha ha ha ha!! (it still has not been ran yet..)
I can't drive to save my life, though... ha! If I were to go, I need to start running mine now... to get some practice, ha ha ha ha!! (it still has not been ran yet..)
#8243
Senior Member
Join Date: Dec 2005
Location: Batavia,
IL
Posts: 10,314
Likes: 0
Received 0 Likes
on
0 Posts
RE: THE LOUNGE 2
ORIGINAL: Lunchboxer
Yeah, for on-road, it is tough to beat the speed!!
0-45mph in, hmm, 2 seconds?! LOL!!
Yeah, for on-road, it is tough to beat the speed!!
0-45mph in, hmm, 2 seconds?! LOL!!
I had that MM in my Bosscat w/street tires - grip was ok, but it was hard to control sometimes since traction was lost now and again. I'll see once I go full bore, but so far that TA05 just grabs the road. Nice!
Never had a TC before, now I can see the appeal.
#8245
RE: THE LOUNGE 2
ORIGINAL: Lunchboxer
LOL, I can run in Class 5, Open Pan Car....
I can't drive to save my life, though... ha! If I were to go, I need to start running mine now... to get some practice, ha ha ha ha!! (it still has not been ran yet..)
LOL, I can run in Class 5, Open Pan Car....
I can't drive to save my life, though... ha! If I were to go, I need to start running mine now... to get some practice, ha ha ha ha!! (it still has not been ran yet..)
#8247
RE: THE LOUNGE 2
I don't mind going to check out the race.. but I doubt that I will race.. LOL!!
I met up w/ TEX at RC Madness a year ago to see the Monster Truck national.. it was fun...
ORIGINAL: AutoXMan
Let me know I would like to watch if you go.
Let me know I would like to watch if you go.
#8248
RE: THE LOUNGE 2
You know for 6-cells, you want the 7700kv!! (gives you around 45mph?)
ORIGINAL: Eman77
Noooooo...!!
ORIGINAL: Lunchboxer
Yeah Eman, you just need the 7700kv motor now...
Yeah Eman, you just need the 7700kv motor now...
#8249
Senior Member
Join Date: Oct 2006
Location: Valley Springs,
CA
Posts: 4,897
Likes: 0
Received 0 Likes
on
0 Posts
RE: THE LOUNGE 2
LOL, stop crashing...
Yeah, brushed motor.. silvercan or BL, remember?!
I guess I do have S600s and Titan 12T as well.. I like them big can motors!!
Yeah, brushed motor.. silvercan or BL, remember?!
I guess I do have S600s and Titan 12T as well.. I like them big can motors!!
I have a problem of things breaking when I'm not even using them haha.