SLC by JF.
06-22-2022, 12:51 AM
#1
Thread Starter
Join Date: Nov 2010
Location: Coffs Harbour NSW, AUSTRALIA
Posts: 1,549
Likes: 0
Received 67 Likes
on
63 Posts
Slc bi jf.
SLC-standing for 'slow-low-close', was my first attempt some month back to build a 6mm Depron mini Bi-plane, with the use of some bits and pieces in my junk box of spares. Ending more less as a failure, bit of a dog to fly especialy in bit of wind. Much too heavy for its size, at over 500 grams+ AUW on 3S/800mA even as a bi-winger.
It has been sitting for a while unflown after building much lighter ones ever since, but took it out again for couple of twilight flights in dead calm to check my reflexes, LOL.
Not so slow, and a bit safer to keep it higher and slightly further! LOL.
Back in action after a break.
Too heavy at 550 grams.
Not so slow as expected, bit of a handle!
It has been sitting for a while unflown after building much lighter ones ever since, but took it out again for couple of twilight flights in dead calm to check my reflexes, LOL.
Not so slow, and a bit safer to keep it higher and slightly further! LOL.
Back in action after a break.
Too heavy at 550 grams.
Not so slow as expected, bit of a handle!
Last edited by Joseph Frost; 06-22-2022 at 01:00 AM. Reason: Correction.
