Morris Fun Design
#1
Senior Member
Thread Starter
Join Date: Jan 2002
Location: St Louis,
MO
Posts: 602
Likes: 0
Received 0 Likes
on
0 Posts
Morris Fun Design
Is the Morris Fun Design out of production? I had one with a Morris (Rossi 45) Powerhouse 45 rear exhaust engine and would like
to replace it. Its the only plane that will accept a rear exhaust engine. I was told by Morris and others that the Morris Top Cap
would accept a rear exhaust engine but they were all wrong. I bought a Top Cap and had to install my OS 46SF engine on it. The
Top Cap is a great plane also but would like another Fun Design. Any help?????
#7
Senior Member
Thread Starter
Join Date: Jan 2002
Location: St Louis,
MO
Posts: 602
Likes: 0
Received 0 Likes
on
0 Posts
RE: Morris Fun Design
Thanks for the offer. I decided to make a Fun Design from my previous Fun Design plans. I kept a
cardboard template of each different rib. There only 12 ribs and a few tricky cut-outs for the front of
the fuselage.Balsa. tailwheel, 3/4x1/8" aluminum flat and a few sticks will only cost about $35. I have
the Monokote, fuel tank, hardwood, and foam wheels. Thanks again.
cardboard template of each different rib. There only 12 ribs and a few tricky cut-outs for the front of
the fuselage.Balsa. tailwheel, 3/4x1/8" aluminum flat and a few sticks will only cost about $35. I have
the Monokote, fuel tank, hardwood, and foam wheels. Thanks again.