Mousse can muffler
02-04-2003 | 11:31 PM
#1
Thread Starter
Senior Member
My Feedback: (1)
Joined: Mar 2002
Posts: 515
Likes: 0
Received 0 Likes
on
0 Posts
From: Noble,
IL,
Mousse can muffler
I just bought a new Webra.32, and am going to build a mousse can for it. What size can works best for a Webra.32? I have been building my cans a little different from what I've been seeing on the different web sites. I have been making a rear cone for the stinger. Does anyone have thoughts on how far into the can the inlet should go? Thanks Tom
02-05-2003 | 12:07 AM
#2
Senior Member
My Feedback: (1)
Joined: Jan 2003
Posts: 1,652
Likes: 0
Received 0 Likes
on
0 Posts
From: Tucson, AZ,
Mousse can muffler
I uesd one of the Kentuky Mousecan pipes recentlly on a Mag28 and a 36, works great. i got about 1000 RPM increase on an 11x4 prop. its not a webra, but it might put you in the right ballpark.
The can is 4 inches long by 1.5 Dia.
The header is 6.5 long from the front of the mounting flange and extends thru the can to within 1/2 inch of the bottom of the can. its a little like the ultrathrust.
The can is 4 inches long by 1.5 Dia.
The header is 6.5 long from the front of the mounting flange and extends thru the can to within 1/2 inch of the bottom of the can. its a little like the ultrathrust.
