Ideas for 60 size engine.
02-13-2003 | 09:41 PM
#2
Senior Member
Joined: Apr 2002
Posts: 1,145
Likes: 0
Received 0 Likes
on
0 Posts
From: Oskaloosa, IA
Ideas for 60 size engine.
The Morris SudoKoi 60 is the only 60 size Profile I know of.
The kit does not have a good reputation for being easy to build.
If you do decide to go with the SudoKoi 60, there are several people here who have built one. Do a search and you will find the information you need. I believe Wayne Geffon did a thread on his build of the SudoKoi 60.
Or, you try to enlarge a Morris the Knife to a 60 size? That shouldn't be too hard.
The kit does not have a good reputation for being easy to build.
If you do decide to go with the SudoKoi 60, there are several people here who have built one. Do a search and you will find the information you need. I believe Wayne Geffon did a thread on his build of the SudoKoi 60.
Or, you try to enlarge a Morris the Knife to a 60 size? That shouldn't be too hard.
02-14-2003 | 12:59 AM
#4
Senior Member
My Feedback: (1)
Joined: Jan 2002
Posts: 1,509
Likes: 0
Received 0 Likes
on
0 Posts
From: Easley, SC
Ideas for 60 size engine.
IMHO - Your best bet is to scale up an existing profile. Find a set of scratch builder's plans for a profile that you like and scale it up for your 60. The few 60-size profiles out there are all too heavy for a 60. The only other option is to trade your 60 for a good 45 - 50 and go with a 40-size Fun Fly. There are plenty to choose from.
Kevin
Kevin
