MVVS engines
03-15-2003 | 01:55 PM
#1
Thread Starter
Senior Member
My Feedback: (2)
Joined: Nov 2002
Posts: 604
Likes: 0
Received 0 Likes
on
0 Posts
From: Lima, OH,
MVVS engines
Hi Guys!
I just picked up a Sig profile Ultimate and a 60 size Morris Su-Do Khoi. I wanted a 50 Webra for the Ultimate but haven't had much luck finding one, so I came to this thread to see if I could find any response to powering the both of them. After some research I was wondering if anybody has experience with MVVS, the .49 and .77 in particular.
I just picked up a Sig profile Ultimate and a 60 size Morris Su-Do Khoi. I wanted a 50 Webra for the Ultimate but haven't had much luck finding one, so I came to this thread to see if I could find any response to powering the both of them. After some research I was wondering if anybody has experience with MVVS, the .49 and .77 in particular.
03-15-2003 | 03:48 PM
#3
My Feedback: (4)
Joined: Jan 2002
Posts: 4,159
Likes: 0
Received 0 Likes
on
0 Posts
From: Montreal, CANADA
MVVS
the .49 is a very good engine and the .91 is much better than the .77
in any case make sure you have the new carbs on them
JAKA could tell you the no. regarding the carbs
in any case make sure you have the new carbs on them
JAKA could tell you the no. regarding the carbs
03-16-2003 | 03:12 AM
#5
My Feedback: (4)
Joined: Jan 2002
Posts: 4,159
Likes: 0
Received 0 Likes
on
0 Posts
From: Montreal, CANADA
have a look at those
http://www.rcuniverse.com/showthread...highlight=MVVS
http://www.rcuniverse.com/showthread...highlight=MVVS
http://www.rcuniverse.com/showthread...highlight=MVVS
http://www.rcuniverse.com/showthread...highlight=MVVS
you can find more if you do a search "MVVS carb Jaka"
Good luck!!
http://www.rcuniverse.com/showthread...highlight=MVVS
http://www.rcuniverse.com/showthread...highlight=MVVS
http://www.rcuniverse.com/showthread...highlight=MVVS
you can find more if you do a search "MVVS carb Jaka"
Good luck!!
