Vacuum Bagging a 426 or 428 Wing
10-25-2011, 05:45 PM
#26
Thread Starter
Join Date: Nov 2007
Location: Fritch,
TX
Posts: 2,060
Likes: 0
Received 0 Likes
on
0 Posts
RE: Vacuum Bagging a 426 or 428 Wing
The following are some the required steps to complete the wing:
1) Add wood reinforcement for wing mounting bolts
2) Apply several layers of 2 ounce fiberglass cloth at the wing center section
3) Attach and shape the wing tips
3) Apply the aileron hinge material
4) Install torque rods
See the following from the ViperDog construction for step-by-step details:
http://www.rcuniverse.com/forum/fb.asp?m=10586007
1) Add wood reinforcement for wing mounting bolts
2) Apply several layers of 2 ounce fiberglass cloth at the wing center section
3) Attach and shape the wing tips
3) Apply the aileron hinge material
4) Install torque rods
See the following from the ViperDog construction for step-by-step details:
http://www.rcuniverse.com/forum/fb.asp?m=10586007
