New Dazzler, need help
08-31-2003 | 01:47 AM
#1
Thread Starter
Senior Member
My Feedback: (3)
Joined: May 2003
Posts: 335
Likes: 0
Received 0 Likes
on
0 Posts
From: Edmond,
OK
New Dazzler, need help
Bought a new Dazzler ARF last evening and am working on hooking up the last few control surfaces. I am using a Futaba 6EXA radio with 4 S3004 (bb) servos for the control surfaces and a JR NES 341 (mini) servo for the throttle (happenned to have it and didn't want to drive to the hobby shop.) The mini servo for the throttle is buzzing intermittently, it is not binding or under any unusual load. Can anyone give me any assistance?
As a side note, The quality of this ARF is excellent.
As a side note, The quality of this ARF is excellent.
08-31-2003 | 05:11 AM
#2
Senior Member
My Feedback: (5)
Joined: Jul 2003
Posts: 2,668
Likes: 0
Received 0 Likes
on
0 Posts
From: Tacoma, WA
New Dazzler, need help
My mini that I had on the throttle of my Laser 3D use to do that. I concluded that it was buzzing just from moving the control rod. Once the rod is moved, the strain stops and the buzzing stops.
