DX7 set-up question
03-04-2007 | 07:30 PM
#1
Thread Starter
Junior Member
Joined: Jan 2006
Posts: 8
Likes: 0
Received 0 Likes
on
0 Posts
From: Cumming,
GA
DX7 set-up question
Using the flaperon mode in the DX7 so that the ailerons have their own channels, shouldn’t you be able to reverse each servo independently?
03-04-2007 | 08:00 PM
#2
Senior Member
Joined: Oct 2002
Posts: 1,047
Likes: 0
Received 0 Likes
on
0 Posts
From: Leesburg,
IN
RE: DX7 set-up question
Yes. Reverse the aileron and AUX1 servos - assuming that you plugged the one servo for the left aileron into the AUX1 port.
You would be better off posting these sorts of questions on the Radio forum or, better yet, read the existing threads on the DX-7 that are there.
You would be better off posting these sorts of questions on the Radio forum or, better yet, read the existing threads on the DX-7 that are there.
03-04-2007 | 09:09 PM
#3
Thread Starter
Junior Member
Joined: Jan 2006
Posts: 8
Likes: 0
Received 0 Likes
on
0 Posts
From: Cumming,
GA
RE: DX7 set-up question
I'll move to the Radio forum for additional questions, thanks. I reversed the "flap" channel and it did exactly what I needed it to do. Thanks again.
