RCU Forums - Spinner problem

RCU Forums (https://www.rcuniverse.com/forum/)

- Questions and Answers (https://www.rcuniverse.com/forum/questions-answers-154/)

- - Spinner problem (https://www.rcuniverse.com/forum/questions-answers-154/11408637-spinner-problem.html)

CB36	02-13-2013 12:09 PM

Spinner problem

Hi all,
I'm trying to install a Great Planes 2-1/2" aluminum spinner on my Magnum 61 2-stroke, w/APC 11x7 prop. I bought the 5/16 adapter for the shaft, (threads in end for spinner bolt). The adapter set comes with a washer that accepts the shoulder of the nut. I have WAY too much prop shaft left and the nut/washer is nearly 3/8" from tightening when it bottoms out on the shaft. Suggestions?

bikerbc

02-13-2013 03:04 PM

RE: Spinner problem

You have the wrong adapter nut..You probably have the short one and you need the long one..

Gray Beard

02-13-2013 04:34 PM

RE: Spinner problem

Are you double nutting using the stock nut? Stock nut on first then the adapter.

All times are GMT -8. The time now is 09:28 PM.