diaphram on a G 26
 

Im replacing the fuel diaphragm on my G26. which way does the gasket fit, Does it go on top of the diaphragm or underneath it against the carb?

THX TAZZZZ

If its a Walbro as I remember its on top toward the cover plate. There is lots of iformation on the internet on Walbros......

It's a walbro wt645. That's what I thought but to make sure I'm doing a search. ..and getting different answers. I need to get it right before I install it. Thanks for the comeback. TAZZZZ

Any small engine repair place should give you your answer, they are about all the same.

Understanding how it works helps. The pump flaps seal on the carb body. If you put the gasket between the diaphragm and the body, there will be a space there and the flaps won't seal. It's really simple once you know, but I made that mistake once.

so what you are saying is the gasket goes up against the carb body right? With the diaphram against the cover. TAZZZZ

Other way around

I found the schematic. It shows the diaphragm goes on top of the gasket against the cover.