RCU Forums - Needle setting on an Evolution 100 engine

RCU Forums (https://www.rcuniverse.com/forum/)

- Questions and Answers (https://www.rcuniverse.com/forum/questions-answers-154/)

- - Needle setting on an Evolution 100 engine (https://www.rcuniverse.com/forum/questions-answers-154/3233212-needle-setting-evolution-100-engine.html)

gdlong

08-05-2005 01:45 AM

Needle setting on an Evolution 100 engine

I took out the needle on my Evolution engine to fit the cowl onto my FUntana90. I forgot to count the turns before doing so. There is no mention in the maual on how many turns to start with as the Set Right needle is preset at teh factory. Any help with this?

Flying Hog

08-05-2005 07:32 AM

RE: Needle setting on an Evolution 100 engine

Screw it all the way in, NOT Tight, Just till you feel it stop. Then 3 complete turns out...Start there and it will probaly be on the rich side, but you will be able to set the high end from there. Hope this helps.

All times are GMT -8. The time now is 06:07 PM.