Updates to Assembly Manuals
 

Dear All,

I will be anouncing any updates to our assembly manuals on this thread. It will always stay on top so you won't miss anything.

Regards,
Reza Gholamipour
Quique's Aircraft Support

RE: Updates to Assembly Manuals
 

Update for QQ-Yak 102":

Our QQ-Yak 102" assembly manual is updated to show correct way of pull-pull installation. Please check www.qqaircraft.com in couple of hours.

Regards,
Reza Gh.

RE: Updates to Assembly Manuals
 

i suppose this modification is due to the "breaking" cable of the rudder?

RE: Updates to Assembly Manuals
 

More due to mis-installation and cable pulling out of the sleeve.

Thank you,
Reza

RE: Updates to Assembly Manuals
 

Update for QQ-Yak 69":

I'd like to emphasize on the fact that you need to use minimum of 130 oz-in digital servos for this plane. Please do not use analog servos if you can and if you decide to use analog servos, make sure to use metal gear and minimum torque of 180 oz-in.

Reza

RE: Updates to Assembly Manuals
 

QQ Yak 69" can you use DS8411SA servos?

RE: Updates to Assembly Manuals
 

Yes, you can.

RE: Updates to Assembly Manuals
 

When will the GEN III manuals be online?

RE: Updates to Assembly Manuals
 

Do you know or could you measure the overall length of this aircraft?

RE: Updates to Assembly Manuals
 

I'm not really sure what Quique wants to do about this but I suspect we will be using the same manual since changes are not that significant and won't affect the assembly.

RE: Updates to Assembly Manuals
 

So does the Gen III have all the same hardware inclusions with it, like the titanium pushrods, ball links, cf tubes, sfg's, CF rudder horn, composite landing gear, pull pull hardware, wing bags and canopy cover?

Thanks
Bob

RE: Updates to Assembly Manuals
 

How about an update for the elevator cables in the 49" Yak. Step 3 and 7 both state tha the upper and lower slot are for the right servo arm connection. Wich one is it?
Adam

RE: Updates to Assembly Manuals
 

Will you be posting update for mounting DA85 in Pitts Python 100?

RE: Updates to Assembly Manuals
 

Sure. It's here www.RCModelAviator.com/QQAC/DA85Conversion.pdf
Thank you for reminding me.

Reza

RE: Updates to Assembly Manuals
 

Just started to assemble my Pitts Python and "no bolts to install the landing gear".. What size are the installed blind nuts ? Hope they are not metric, as I will not be able to get those at the local hardware store !!

RE: Updates to Assembly Manuals
 

I think this has been mentioned in another thread......but there is no mention of installing the tailwheel and how it is set up in the Python manual. Also, the manual addition on installing the DA-85 is excellent.

Jeff

RE: Updates to Assembly Manuals
 

Hey Reaza the manual for the Gen3 and the gen4 are all Gen2 manuals and i cant tell the info i need on them. Is this mistake and do you have a manual that depicts the gen 4 in and out?

RE: Updates to Assembly Manuals
 

G4 and G3 are the same in assembly with G2. Quique didn't feel the need of new assembly manual as construction is the same. Do you have a G4 and something looks different than manual? or you just wanted to see the pictures?

Let me know.

Reza

RE: Updates to Assembly Manuals
 

Im going to get a G4 if the current plans fall through and it doesnt look good for the current plans.

Im mainly interested in the canister tunnel on the g4 and a few other things like canopy instalation. I just want to make an informed decision.

My buddy Meanrudder is in my ear every night on the phone telling me to get a G4 mobster style lol he should be on the payroll.

RE: Updates to Assembly Manuals
 

LOL he is not:D

RE: Updates to Assembly Manuals
 

Ok plans fell through and I told my lhs to order me a Gen IV; I hope its here before the weekend.

RE: Updates to Assembly Manuals
 

I have the Gen II manual for my G4 100cc yak. Manual says to cross the pull-pull cable and use Sullivan Gold-n-rod 504 over the cables to block RF. What change/update is there about the rudder pull-pull set up not noted on the manual that came with the plane? I just got the plane 10 days ago.

RE: Updates to Assembly Manuals
 

Pull-pull is the same as G2. If you are flying 2.4 then you won't need the cover over the cable otherwise everything else stays the same including crossing the cable

RE: Updates to Assembly Manuals
 

I am in the process of mounting the cowl on a QQ Pitts Python, and noticed that on the upper section of the firewall ther is three holes with blind nuts on the back side of the firewall that appear to be mounting holes for supports like on the bottom of the cowl. What are these suppose to be used for? The reason I'm asking I am having problems getting the top section of the cowl to line up with the outline of the firewall, so was I shorted some brackets for the top cowl section or was something left out of the manual that I need to be aware of to help the fitment of the cowl.

RE: Updates to Assembly Manuals
 

is there any update for instalation of the tail wheel on the yak54 86"? the new tail wheel come with a spring and not a "piano wire" as stated on the manual. also there would be nice to had photos of the ruder pull pull instlation looking at both sides , just as a help, i had too look on other threads and forum to be 100% sure i'm doing it right.

Thanks and great arf so far :p