XTM 247 pro seized!!
04-13-2012 | 09:43 AM
#1
Thread Starter
Junior Member
Joined: Mar 2012
Posts: 6
Likes: 0
Received 0 Likes
on
0 Posts
From: Basingstoke, Newbury, Reading, UNITED KINGDOM
XTM 247 pro seized!!
<span style="font-family: Verdana; "> Hi Guys.
Slight problem !
ive had my xtm 247 pro engine for about 2 weeks now and today the car just cut out at full throttle. i tried to pull it to start again and it wouldnt budge ATALL.
after taking the cooling head off and pulling the sleeve out it appears my conrod is mashed to hell.</span>
<span style="font-family: Verdana; ">
ive ran it in all by the book on 1/2 gallon of 16% and have recently been using 20%.
any ideas and advice?
also i forgot to send off the warranty slip which i was meant to do within 10 days
HELP!</span>
<br type="_moz" />
Slight problem !
ive had my xtm 247 pro engine for about 2 weeks now and today the car just cut out at full throttle. i tried to pull it to start again and it wouldnt budge ATALL.
after taking the cooling head off and pulling the sleeve out it appears my conrod is mashed to hell.</span>
<span style="font-family: Verdana; ">
ive ran it in all by the book on 1/2 gallon of 16% and have recently been using 20%.
any ideas and advice?
also i forgot to send off the warranty slip which i was meant to do within 10 days
HELP!</span>
<br type="_moz" />
04-13-2012 | 09:59 AM
#2
Senior Member
Joined: Oct 2006
Posts: 1,289
Likes: 0
Received 0 Likes
on
0 Posts
From: Sonoma,
CA
RE: XTM 247 pro seized!!
ORIGINAL: TommyNitro
<span style="font-family: Verdana"> Hi Guys.
Slight problem !
ive had my xtm 247 pro engine for about 2 weeks now and today the car just cut out at full throttle. i tried to pull it to start again and it wouldnt budge ATALL.
after taking the cooling head off and pulling the sleeve out it appears my conrod is mashed to hell.</span>
<span style="font-family: Verdana">
ive ran it in all by the book on 1/2 gallon of 16% and have recently been using 20%.
any ideas and advice?
also i forgot to send off the warranty slip which i was meant to do within 10 days
HELP!</span>
<br type="_moz" />
<span style="font-family: Verdana"> Hi Guys.
Slight problem !
ive had my xtm 247 pro engine for about 2 weeks now and today the car just cut out at full throttle. i tried to pull it to start again and it wouldnt budge ATALL.
after taking the cooling head off and pulling the sleeve out it appears my conrod is mashed to hell.</span>
<span style="font-family: Verdana">
ive ran it in all by the book on 1/2 gallon of 16% and have recently been using 20%.
any ideas and advice?
also i forgot to send off the warranty slip which i was meant to do within 10 days
HELP!</span>
<br type="_moz" />
04-13-2012 | 10:10 AM
#3
Thread Starter
Junior Member
Joined: Mar 2012
Posts: 6
Likes: 0
Received 0 Likes
on
0 Posts
From: Basingstoke, Newbury, Reading, UNITED KINGDOM
RE: XTM 247 pro seized!!
ok well it has ssemed to be running fine.
surely even if it had been running too lean it would take longer than 2 weeks. thats about 6 or 8 6tank runs for me<br type="_moz" />
surely even if it had been running too lean it would take longer than 2 weeks. thats about 6 or 8 6tank runs for me<br type="_moz" />
04-13-2012 | 02:12 PM
#4
Senior Member
Joined: Oct 2006
Posts: 1,289
Likes: 0
Received 0 Likes
on
0 Posts
From: Sonoma,
CA
RE: XTM 247 pro seized!!
ORIGINAL: TommyNitro
ok well it has ssemed to be running fine.
surely even if it had been running too lean it would take longer than 2 weeks. thats about 6 or 8 6tank runs for me<br type="_moz" />
ok well it has ssemed to be running fine.
surely even if it had been running too lean it would take longer than 2 weeks. thats about 6 or 8 6tank runs for me<br type="_moz" />
