Need help trying to ID this buggy!!!!
#1
Junior Member
Thread Starter
Join Date: Jun 2012
Location: Oconomowoc, WI
Posts: 4
Likes: 0
Received 0 Likes
on
0 Posts
Need help trying to ID this buggy!!!!
So I got this buggy and a red cat off a guy who doesnt know anything about them, I looked for a week, went to different websites and looked through models and instrucitons trying to figure it out with no luck, I pretty sure that it is an Ofna but can not confirm. So if anybody out there can help me out that would be awesome.
#4
Junior Member
Thread Starter
Join Date: Jun 2012
Location: Oconomowoc, WI
Posts: 4
Likes: 0
Received 0 Likes
on
0 Posts
RE: Need help trying to ID this buggy!!!!
So after a long and tring searching on the net, by some weird chance a picture popped up and low and behold, it was the buggy I have been searching for. turns out that it is a GS Racing Storm buggy very sure of it, and it was hard to find there web page to confrim it. so to those who stopped by and helped thank you very much.
#6
Junior Member
Thread Starter
Join Date: Jun 2012
Location: Oconomowoc, WI
Posts: 4
Likes: 0
Received 0 Likes
on
0 Posts
RE: Need help trying to ID this buggy!!!!
I thought the same when i looked up the mbx5 then looked at mbx4 nope the 4 had a pivot ball suspension setup they did have a knuckle setup as well but the diff cases are different and the rear chasis brace mount was different still.
here is a pic of a gs storm I found
here is a pic of a gs storm I found
#7
My Feedback: (2)
RE: Need help trying to ID this buggy!!!!
Hi That looks alot like a Jammin X1-CR or X2 cr check out this link and look for the manual. http://www.jamminproducts.com/
Michael Johnston
Michael Johnston
#8
RE: Need help trying to ID this buggy!!!!
ORIGINAL: mkjohnston
Hi That looks alot like a Jammin X1-CR or X2 cr check out this link and look for the manual. http://www.jamminproducts.com/
Michael Johnston
Hi That looks alot like a Jammin X1-CR or X2 cr check out this link and look for the manual. http://www.jamminproducts.com/
Michael Johnston
I would agree with the GS might be a slightly different model of it seeing the front brace looks a tad different but the rest looks spot on.