Servos on a Hyper 7Pro
04-25-2004 | 11:03 AM
#2
My Feedback: (158)
RE: Servos on a Hyper 7Pro
You really should try and stick with a metal gear servo.
that servo has reasonable torque and speed, but the Nylon gears may not hold up for you.
For steering in the Futaba line, I like
9402, 9450, 9451
At around $90 they are not cheep, but I've had a 9450 in my buggy and Monster truck for over 2 years with Zero problems
Good luck
that servo has reasonable torque and speed, but the Nylon gears may not hold up for you.
For steering in the Futaba line, I like
9402, 9450, 9451
At around $90 they are not cheep, but I've had a 9450 in my buggy and Monster truck for over 2 years with Zero problems
Good luck
04-26-2004 | 11:29 AM
#3
Junior Member
Joined: Apr 2004
Posts: 29
Likes: 0
Received 0 Likes
on
0 Posts
From: x,
NB, UNITED KINGDOM
RE: Servos on a Hyper 7Pro
Yeah, stick with the metal gear servo's. They are worth it .... I was at a practise the other day. Most of the guys there had the cheapy Futaba's. One by one the started stripping. You might also want to look at the Hitec 645 ... they are metal geared, but not quite as high spec as the Futaba, but they are about half the price.
Spark88
Spark88
