fitting a venom speed meter to a hyper pbs!
09-20-2004 | 03:30 AM
#2
Senior Member
Joined: May 2004
Posts: 327
Likes: 0
Received 0 Likes
on
0 Posts
From: londonsurrey , UNITED KINGDOM
RE: fitting a venom speed meter to a hyper pbs!
drill you transmission and pop the magnet in it with some threadlock or super glue or place the magnet on the front driveshaft with a spec of superglue and use some electric tape around it. make sure the tape is so taunt that the magnet bulges through the tape. I did it this method and the thing is still there 8 months later with no sign of giving.
at least this way you can remove and place on any other cars that you have without f-cking up your transmission. This method though doesnt have a accurate readout due when on bumbpy surfaces dues to wheelspin but on road itt works cool.
at least this way you can remove and place on any other cars that you have without f-cking up your transmission. This method though doesnt have a accurate readout due when on bumbpy surfaces dues to wheelspin but on road itt works cool.
