Is this the right o-ring set for my hyper diffs.
08-04-2005 | 05:40 PM
#1
Thread Starter
Junior Member
Joined: May 2005
Posts: 16
Likes: 0
Received 0 Likes
on
0 Posts
From: Goldthwaite, TX
Is this the right o-ring set for my hyper diffs.
I tried to search and didnt find anything here. So I guess Ill ask... is this the right kit for the o-rings for my hyper 7 diffs including the center (i know I will need 3) ? Or is there another o-ring kit with maybe just o-rings and shims? if so I cant find it [link=http://www2.towerhobbies.com/cgi-bin/wti0001p?&I=LXBZD0&P=0]here[/link]
08-05-2005 | 06:42 AM
#2
Senior Member
My Feedback: (3)
Joined: Jun 2004
Posts: 1,630
Likes: 0
Received 0 Likes
on
0 Posts
From: KEWANEE,
IL
RE: Is this the right o-ring set for my hyper diffs.
just go to your local hobby store and see what they got or ebay has everything for a hyper and then some...
08-05-2005 | 07:52 AM
#3
Senior Member
Joined: Aug 2004
Posts: 444
Likes: 0
Received 0 Likes
on
0 Posts
From: chesterland,
OH
RE: Is this the right o-ring set for my hyper diffs.
On the right side of the page in your link [link=http://www2.towerhobbies.com/cgi-bin/wti0001p?&I=LXBZD0&P=0#partsusage]clickey[/link]
could have saved yourself some typing...that kit is for hong nor models.
could have saved yourself some typing...that kit is for hong nor models.
08-05-2005 | 08:52 AM
#4
Thread Starter
Junior Member
Joined: May 2005
Posts: 16
Likes: 0
Received 0 Likes
on
0 Posts
From: Goldthwaite, TX
RE: Is this the right o-ring set for my hyper diffs.
well thats all I could find besides this [link=http://www2.towerhobbies.com/cgi-bin/wti0001p?&I=LXCVR4&P=PU] click[/link] I guess this is it, but the manual says they are 6mm and 20mm o-rings maybe thay are measuring inside diameter or something.... my lhs is 100 miles away so this is all i got right now
