Problems with CEN MATRIX
01-06-2006 | 03:45 AM
#26
Thread Starter
Junior Member
Joined: Dec 2005
Posts: 16
Likes: 0
Received 0 Likes
on
0 Posts
From: Las Vegas, NV
RE: Problems with CEN MATRIX
O, and also wich is the best fuel for my car, because when i went to the hobby shop the first day i asked the guy he told me that TRAXXAS top fuel (10%) is good for my car, but now i see that 20% i probably better
thanks again
forgive the noob
thanks again
forgive the noob
01-06-2006 | 05:09 AM
#29
Senior Member
Joined: Dec 2005
Posts: 142
Likes: 0
Received 0 Likes
on
0 Posts
From: Newville, PA
RE: Problems with CEN MATRIX
The screw on the left side of the picture is the highspeed needle. Turn it clockwise to make the mixture leaner.
The screw on the right side of pic is I don't know what.
The screw on the other side of the carb is the low speed mixture. Turn it clockwise to make the mixture leaner.
Here is a goood post on how to tune your motor.
[link]http://www.rcuniverse.com/forum/m_3734570/tm.htm[/link]
The screw on the right side of pic is I don't know what.
The screw on the other side of the carb is the low speed mixture. Turn it clockwise to make the mixture leaner.
Here is a goood post on how to tune your motor.
[link]http://www.rcuniverse.com/forum/m_3734570/tm.htm[/link]
