engine settings
 

i was wondering if any one knows the base settings for a prp swift stock engine as i can find them anwhere and they are not incluided in the manual it just says that they are preset

any help with be good thanks

RE: engine settings
 

Really- there are no base settings on a nitro engines carburetor. Because your geographic location, weather, fuel, plug, pipe all play a role in the carbs tuning. I'd say just richen up all the needles a couple turns and then lean until it starts. Then follow a good break-in method of your choice. I recommend the Bess Method for break-in.

RE: engine settings
 

i believe the mayhems motor is very simular to the 24.7 engines i may be wrong but check that out it may help you.

RE: engine settings
 

most engines nowadays are around these settings.

1 mm throat gap , LSN 3 - 4 turns out from closed and the HSN 3 turns out. Not the garunteed figures for you but they should get her going.