RE: OFFICIAL HYPER 7 THREAD
 

I'm running the stock black springs that came with it.

RE: OFFICIAL HYPER 7 THREAD
 

Thanks! It started out as a TQ rtr, I added alot of pro parts including the 2004 yannick upgrade, currently i'm just using the shock towers. The upgrade came with shock towers, a milled chassis, alumunim center dog bones and shocks. I'm also using the cnc rear uprights, and the H8 front knuckels and wing mount.

I got the buggy off a friend who had it about 4 years, he didn't run it much and never raced it. He need some cash and I wanted to give 1/8 scale buggy a try, since I had just been racing monster trucks. Buggies are so much more fun to drive and faster! This is the first season that I've been racing buggy and I love it, I'm hooked!

RE: OFFICIAL HYPER 7 THREAD
 

Hey fellas,
wHat's the difference between the torsen gear center diff and the spider gear center diff?

RE: OFFICIAL HYPER 7 THREAD
 

A torsen diff (torque sensing) will unload power to the wheels with the most traction. For example if your front wheels lift of the floor, more power will be sent to the back wheels. This is opposed to the standard type diff where more power would be sent to the front.
Torsen diffs cannot really be tuned like normal diffs.
A spider diff is a normal style diff with more (and smaller) planetary gears inside. This makes them more robust (though the standard ones are very tough) and gives less rotating mass on the drive train.

RE: OFFICIAL HYPER 7 THREAD
 

Thanks for that. Clears up a lot for me.

RE: OFFICIAL HYPER 7 THREAD
 

Hey i just received a new spider diff for my Hyper 7 and new front/rear diffs. What weight oil do y'all put in your spider center diffs? 7,000? Please advise. Also, do i need to do anything special to switch it them from grease to silicon oil? Any special sealing procedures?

RE: OFFICIAL HYPER 7 THREAD
 

hi at about what ground clearnance does your average hyper 7 run? How durable are they and do they need any mods?

RE: OFFICIAL HYPER 7 THREAD
 

[8D]hi . they are very tough buggie's and do not need any up-grade's for mopst people . the ground clearance is set diff. by each person and for me i set each of my buggy's diff. so each of them have diff. ground clearance if you tell me what one you have i can tell you what my is set at . thank's . ;)

RE: OFFICIAL HYPER 7 THREAD
 

I dont have a hyper, i was just wondering how high they were and if grass would slow them down. How high can you set them without them handling bad?

RE: OFFICIAL HYPER 7 THREAD
 

Most all buggies are meant to race or run on a flatter surface, If your going to be running on grass maybe look into a truggy.

RE: OFFICIAL HYPER 7 THREAD
 

Hello everyone haven't been in here in a while.....great job on that body j......and june the buggys are lookin good......well my last post I was running my 8 port race (with new bearing install) and I've had to change my tires again...wasn't getin any traction..went to bow ties...and now they changed the whole set up at the track I run at...its cool though it weeds the people that don't know car control out....[8D]

RE: OFFICIAL HYPER 7 THREAD
 

dude i love your hyper sooo much better then mine . what engine are you running?

RE: OFFICIAL HYPER 7 THREAD
 

It's a hyper 21 race port....now with ceramic bearings....this thing got some wicked acceleration....I have had this engine for sometime now...new bearings,sleeve&piston.....I'll bet I've got 8 to 10 gal's on this block and head....I just got a o.s. v-spec for my 8-T I hope it last half as long as this engine has lasted me...(knock on wood)...[8D]

RE: OFFICIAL HYPER 7 THREAD
 

Heres my hyper 7 (pbs)...Im runnin Picco 0-1 .21 ron paris edition

RE: OFFICIAL HYPER 7 THREAD
 

Just wanted to say this buggy is the toughest buggy I've seen, ever. I have crashed, flipped, landed awkward, cartwheeled, and even had some sideways landings off big jumps. I think to myself, "oh no, that one did it", then I hit the gas and steering and it drives by me over and over. Jumps where other buggies limp away from if they miss by one bit are no match for this thing. It is not human, it does not feel pain! I'm sure others here have seen the same. I am very impressed. Just my two cents.

RE: OFFICIAL HYPER 7 THREAD
 

I took my Hyper 7 out yesterday to Southside RC Track and finished breaking in my new Novarossi Rex .21 7 port turbo. It was a blast. This buggy is nice and handles great. I was having fun running around with my friend's Mugen MBX5 Prospec. There were a few other buggies out there, but i have to say that my Hyper performed great. That engine is a complete sexy power horse. Go Hyper 7!!http://i93.photobucket.com/albums/l5...27/Bowdown.gif

Plus...I have to say that i have a new favorite Servo. The Ace R/C 1015 is a smooth, fast, strong and quiet servo. Plus i save about $15 off of what i pay for the Futaba S9351. It's fast enough to be used for throttle (.10sec) and strong enough to be used for steering (200 oz/in).

http://i93.photobucket.com/albums/l5...7/IMG_8759.jpg

RE: OFFICIAL HYPER 7 THREAD
 

Thought I would bring this thread back to the top as I have noticed lots of Hyper 7 related posts...good to see the 7 is still doing well!
Mine has new skin for the '08 season so I'll get some showoff pics as soon as I can!

-rocky b

RE: OFFICIAL HYPER 7 THREAD
 

hey guys i currently have a xt2 and im wonderin about the hyper 7 tq sport wats the diffrence from the reguler hyper 7?

RE: OFFICIAL HYPER 7 THREAD
 

It is the regular hyper 7. It was just named the TQ after yannick TQ'd at the worlds with one.
Other versions are the pro, PCR and PBS.
The pro is a hopped up TQ and the PCR and PBS use a different suspension set up.

RE: OFFICIAL HYPER 7 THREAD
 

thx guys im goin to pick one up

RE: OFFICIAL HYPER 7 THREAD
 

im new to hyper 7 ...

wanted a project to do & got a hyper 7 pro from ebay
few qustions for you all

1-how long has hyper 7 pro been around
2-when did hyper 8 first come out
3-are hyper7 pro interchangable with newer ofna buggies??

RE: OFFICIAL HYPER 7 THREAD
 

The hyper 7 in various incarnations has been around a very long time in buggy standards 5+ years I think.
The hyper 8 came out about a year and a half ago. Now surpassed by the Hyper 8.5.
Beware by thinking all OFNA buggies are made by OFNA, they are not. The hypers are made by hobao and the others by Hong nor.
Knuckles, diffs and a few other minor parts are interchangeable between the hyper 7 and 8 (8.5). You will find the hyper 7 pro has pretty much same standard of these interchangeable parts. It may be old but the fact its been around so long and still sells by the shipload proves how good it originally was.
It not the greatest now but its still a very worthy performer.
Hope this helps

RE: OFFICIAL HYPER 7 THREAD
 

thanks for the good info & advice

how about .....
-what kind of upgrades other than radio,motor, pipe would you suggest ???????
-is ofna 1/8 buggy rims standard in mounting (older vs newer rims)

RE: OFFICIAL HYPER 7 THREAD
 

Depending which hyper pro you've got really (there were a few versions), you shouldn't need any upgrades.
The pro models have pretty much avery upgrade you need. If its got a cnc chassis and shock towers then you should be ok.
Most 1/8 rims should fit, however there are a few exceptions. Go with Hobao rims as thats who makes the buggy or decent aftermarket stuff like proline.

RE: OFFICIAL HYPER 7 THREAD
 

body question for ya........

will other bodies still fit with hyper 7 pro ....
bodies for Ultra LX One or Kyosho MP 7.5, Ofna 9.5 buggy bodies fit???????

are they that much differnt ???[sm=confused.gif]
p.s im new to 1/8 buggy world