|
RE: OFFICIAL HYPER 7 THREAD
[8D]hi . i was wondering if the spyder gear's ingrove the hyper 7's or not ? just wondering . thank's . ;)
|
RE: OFFICIAL HYPER 7 THREAD
1 Attachment(s)
heres some pics of my H7, it took awhile but got it the way I want.
|
RE: OFFICIAL HYPER 7 THREAD
ORIGINAL: Hincappe 1.5mm, 2.0mm and 2.5mm are the main drivers you need also its good to get the 2.5mm in ball head What.... hincappe offering advice not criticisms, man you must be sick;) |
RE: OFFICIAL HYPER 7 THREAD
ORIGINAL: 86atrack4 heres some pics of my H7, it took awhile but got it the way I want. |
RE: OFFICIAL HYPER 7 THREAD
hey
what hyper 8 parts fit on the hyper 7 i need new engine mounts and i hate the mounts it came with so dose any one know if another brand of engine mount will it? thanks brad |
RE: OFFICIAL HYPER 7 THREAD
i just bought a hyper 7 and i need a clutch bell. what do you guys use? i'm using a werks clutch on a modded platinum .28 for right now till i save up for a good 21.
|
RE: OFFICIAL HYPER 7 THREAD
ORIGINAL: grd4spd25 i just bought a hyper 7 and i need a clutch bell. what do you guys use? i'm using a werks clutch on a modded platinum .28 for right now till i save up for a good 21. |
RE: OFFICIAL HYPER 7 THREAD
Thanks, I do use a starter box. Its a Ofna True Start universal starter box it has a 12v battery and has 2 motors. I've been using this starter box for 3 years and have had no trouble with it.
ORIGINAL: harawong ORIGINAL: 86atrack4 heres some pics of my H7, it took awhile but got it the way I want. |
RE: OFFICIAL HYPER 7 THREAD
The stock clutch bell is a 13t cb, a 13-14 will do just fine. I use ofna cb's, you can find them anywhere.
ORIGINAL: grd4spd25 i just bought a hyper 7 and i need a clutch bell. what do you guys use? i'm using a werks clutch on a modded platinum .28 for right now till i save up for a good 21. |
RE: OFFICIAL HYPER 7 THREAD
cool, i'v seen where they have hyper7 specific clutch bells and i didn't know if you could just use standard ones. i have a 13 and a 14 already i just couldnt wait intill i got my buggy to find out for myself. i'm pretty stoked about getting a buggy, i'v raced stadium trucks and truggies and now i want to get my hands in buggy racing.
|
RE: OFFICIAL HYPER 7 THREAD
Are hyper 7 TQ sport good for racing because Im getting a kit soon and wondering if will be good for racing. I will install a Hyper .21 8port.
|
RE: OFFICIAL HYPER 7 THREAD
Yeah its not a bad racer. The 8 port engine is a good bucget engine too. I have one in my buggy. Be aware that it makes most of its power high up in the rev range and therefore is not so good on short tight tracks where low end power is more important.
|
RE: OFFICIAL HYPER 7 THREAD
ok cool I seen the Ofna Ravanger What do you think about that
|
RE: OFFICIAL HYPER 7 THREAD
They are ok. Good bashing buggies (less good for racing) but I'd still go with the hyper myself
|
RE: OFFICIAL HYPER 7 THREAD
I just started to race and am having trouble getting my Hyper 7 to turn sharp in the turns. The track I race on is a real tight technical course and this is causing a problem. I am running 5000 5000 1000 in my diffs and 35 in my front and rear shocks. I run panther tires. The track is a pretty hard surface. I have tried to adjust the brakes to slide my rear end around the turns and this has helped some but I really would like it to grab though the turns, not slide. If anyone has any ideas I really need them. Thanks
|
RE: OFFICIAL HYPER 7 THREAD
ORIGINAL: TheLegacy I just started to race and am having trouble getting my Hyper 7 to turn sharp in the turns. The track I race on is a real tight technical course and this is causing a problem. I am running 5000 5000 1000 in my diffs and 35 in my front and rear shocks. I run panther tires. The track is a pretty hard surface. I have tried to adjust the brakes to slide my rear end around the turns and this has helped some but I really would like it to grab though the turns, not slide. If anyone has any ideas I really need them. Thanks |
RE: OFFICIAL HYPER 7 THREAD
And are you using a reciever pack, or double A batteries?
|
RE: OFFICIAL HYPER 7 THREAD
.....and what hyper 7 is it? TQ, PBS or pro?
|
RE: OFFICIAL HYPER 7 THREAD
I am using a Team Orion 1600 battery with a JR Racing Z590M Metal High Torque Racing Servo. It is the TQ Hyper 7. Thanks again
|
RE: OFFICIAL HYPER 7 THREAD
You can get more throw by judicious use of a dremmel where the knuckles bind. You can try Changing your diff oil too, though 5000 sounds ok. Going thinner will give more steering into the corner off power, whilst thicker will give more out of the corner on power.
Otherwise your about as good as you will get |
RE: OFFICIAL HYPER 7 THREAD
Does your radio have end point adjustments? you could get more steering by adjusting the steering end point.
ORIGINAL: TheLegacy I am using a Team Orion 1600 battery with a JR Racing Z590M Metal High Torque Racing Servo. It is the TQ Hyper 7. Thanks again |
RE: OFFICIAL HYPER 7 THREAD
got the body yesterday.. im in the middle of painting it .. wait to you see it whin it's all done lol....
|
RE: OFFICIAL HYPER 7 THREAD
did ya get the body done yet junebug?
|
RE: OFFICIAL HYPER 7 THREAD
yes .. yesterday i got the dog bone's and the right flywheel.. bumper's still waiting the diff case and the air filter....
|
RE: OFFICIAL HYPER 7 THREAD
Hi there hyper 7 people,just looking for some info looking at buying a hyper 7 mach 28 rtr and just want to know how to run them in or are they all ready run in when you buy them.The truth is i need to know how to run one in with what type of fuel glow plug etc any help much appreciated.thanks robbo South Australia
|
| All times are GMT -8. The time now is 10:25 AM. |
Copyright © 2026 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.