xtm xt2
 

does an1 know the factory needle settings

thanks jake

RE: xtm xt2
 

I believe its 3 turns out for both HSN and LSN. And I am assuming you have the 24.7 engine.

RE: xtm xt2
 

HSN is 3 full turns out

LSN is hold the throttle open all the way, bottom out the LSN and back it out 3 full turns.....................throttle must be held at full open doing this adjustment [8D]

Those are factory break in settings...........you will have to do some adjusting after set up [:-]

RE: xtm xt2
 

wrong, wrong,wrong.... the HSN is turn it in tilits all the way, then turn it anticlockwise 3.5 turns and the LSN is pull the barrel out with your finger, turn the needle till its all the way in and then turn it back 3 turns (whilst pulling the barrel out)</p>