miss take
#2
RE: miss take
It's not the Miss Take but the Scatwood. http://www.rcairboats.net/phpBB/viewtopic.php?t=1680
A custom round nose.... http://www.rcairboats.net/phpBB/viewtopic.php?t=979
A custom round nose.... http://www.rcairboats.net/phpBB/viewtopic.php?t=979
#5
Senior Member
Join Date: Oct 2005
Location: Yellowknife,
NT, CANADA
Posts: 231
Likes: 0
Received 0 Likes
on
0 Posts
RE: miss take
I helped with some plans for a member a while back here are some links
http://www.rcgroups.com/forums/showthread.php?t=596900
http://www.rcuniverse.com/forum/m_68...tm.htm#6805209
http://www.rcgroups.com/forums/showthread.php?t=596900
http://www.rcuniverse.com/forum/m_68...tm.htm#6805209
#6
Junior Member
Join Date: Nov 2009
Location: Melbourne, AUSTRALIA
Posts: 1
Likes: 0
Received 0 Likes
on
0 Posts
RE: miss take
Hi William,
I have just completed a Miss Take for a brushless outrunner and 3s LiPo 3300 ma just waiting for time to put in water most likely Sunday 13th December at club xmas breakup,
I have built it to about 22 inches long half size, if you want any further info let me know will be happy to let you know how it goes but unfortunately I did not take any photos during construction which was pretty straght forward.
Allen
I have just completed a Miss Take for a brushless outrunner and 3s LiPo 3300 ma just waiting for time to put in water most likely Sunday 13th December at club xmas breakup,
I have built it to about 22 inches long half size, if you want any further info let me know will be happy to let you know how it goes but unfortunately I did not take any photos during construction which was pretty straght forward.
Allen