Does anyone know about the Schiada?
#2
Senior Member
Join Date: Jan 2003
Location: Barrie,
ON, CANADA
Posts: 140
Likes: 0
Received 0 Likes
on
0 Posts
What would you like to know
We are the North American dealer for DPI. (The company that makes the Schiada)
The Schiada is a great beginner boat as it comes from the box. It can easily be hopped up and is still very competative with any similar boat made today.
It has won IMPBA and NAMBA championships in 6 and 7 cell classes.
Any .05 sized motor will fit directly in to the hull, and the speed is only limited by the motor and number of cells you want to use.
I have run our demo with a Hacker B508S brushless, and 8 cells.
Using the Fullers hardware, it managed a respectable 32.4 MPH (Average) on a timed run over a NAMBA legal measured course.
Any more questions, Ask Away!
Peter
www.climatemodels.com
The Schiada is a great beginner boat as it comes from the box. It can easily be hopped up and is still very competative with any similar boat made today.
It has won IMPBA and NAMBA championships in 6 and 7 cell classes.
Any .05 sized motor will fit directly in to the hull, and the speed is only limited by the motor and number of cells you want to use.
I have run our demo with a Hacker B508S brushless, and 8 cells.
Using the Fullers hardware, it managed a respectable 32.4 MPH (Average) on a timed run over a NAMBA legal measured course.
Any more questions, Ask Away!
Peter
www.climatemodels.com
#3
Member
Thread Starter
My Feedback: (1)
Join Date: May 2002
Location: Columbus,
GA
Posts: 32
Likes: 0
Received 0 Likes
on
0 Posts
Does anyone know about the Schiada?
Thanks Climate:
I'm looking at the Basic Kit. Will you send me some pics of the inside and transom (is that the back?)? I'm mostly interested in how the motor and drivetrain is set up.
I'm looking at the Basic Kit. Will you send me some pics of the inside and transom (is that the back?)? I'm mostly interested in how the motor and drivetrain is set up.
#4
My Feedback: (1)
Does anyone know about the Schiada?
It's a pretty good kit. I bought one for my son when he was first starting out. We had a lot of fun with it. I used a lot of my old R/C truck parts in it including mod motors.
A little known fact. The Pro Boat Nitro Fury is the Nitro version of this boat, I still have one of those in my basement. I don't think that they are made any more though.
Jerry Dunlap did a review of this boat in RCBM when it first came out. He later did some mods to it like putting in a suface drive setup.
A little known fact. The Pro Boat Nitro Fury is the Nitro version of this boat, I still have one of those in my basement. I don't think that they are made any more though.
Jerry Dunlap did a review of this boat in RCBM when it first came out. He later did some mods to it like putting in a suface drive setup.
#5
Member
Thread Starter
My Feedback: (1)
Join Date: May 2002
Location: Columbus,
GA
Posts: 32
Likes: 0
Received 0 Likes
on
0 Posts
Does anyone know about the Schiada?
Thanks Ron:
I was just looking at the Nitro Fury in an old mag. I found it here:
http://woodwardshobbies.com/Radio_Co...r_c_boats.html
If you'd like to sell yours, send pics and lmk.
I was just looking at the Nitro Fury in an old mag. I found it here:
http://woodwardshobbies.com/Radio_Co...r_c_boats.html
If you'd like to sell yours, send pics and lmk.