RC Surfer
#2777
Senior Member
Join Date: Mar 2005
Location: shellharbour, AUSTRALIA
Posts: 510
Likes: 0
Received 0 Likes
on
0 Posts
RE: RC Surfer
managed to get through a few packs between the rain but really windy, anyway managed to get some good rides in that put a smile on my face. chargin up for later hopefully the wind dies down.
later
later
#2779
Senior Member
Join Date: Mar 2005
Location: shellharbour, AUSTRALIA
Posts: 510
Likes: 0
Received 0 Likes
on
0 Posts
RE: RC Surfer
raining and windy here still, so what to do? mods! open a can of worms! yeah why not, gonna try lower motor and bend drive shaft so it does not have any down angle and see what that does.
hope you guys are gettin some waves
later
hope you guys are gettin some waves
later
#2780
Senior Member
Join Date: Apr 2010
Location: OUTLAWS CLUBHOUSE OZ
Posts: 1,205
Likes: 0
Received 0 Likes
on
0 Posts
RE: RC Surfer
Hi Maui John,
Just go to page 37 and you will find everything you need to know.
You will probably have to resize your pic.
There is info on how / where to do that too.
Good Luck, it is easy.
JIMI
Just go to page 37 and you will find everything you need to know.
You will probably have to resize your pic.
There is info on how / where to do that too.
Good Luck, it is easy.
JIMI
#2781
Senior Member
Join Date: Mar 2005
Location: shellharbour, AUSTRALIA
Posts: 510
Likes: 0
Received 0 Likes
on
0 Posts
RE: RC Surfer
hey guys. cutty cutty going well so far.
also had another idea but am gonna keep it secret 00dan style for now, may be crap may not and wont be able to try it for a while but could be awesome, will keep you posted.(hint-it will involve use of 3rd channel).
later
also had another idea but am gonna keep it secret 00dan style for now, may be crap may not and wont be able to try it for a while but could be awesome, will keep you posted.(hint-it will involve use of 3rd channel).
later
#2782
Member
Join Date: Oct 2008
Location: Lake Cathiensw, AUSTRALIA
Posts: 88
Likes: 0
Received 0 Likes
on
0 Posts
RE: RC Surfer
Hey Fish
I was going to do something with the 3rd channel but it was all just getting to big a mod i wanted to get it in the water i had a few idea's on what i could use the 3rd channel for be interested to see what you come up with
00Dan Style
I was going to do something with the 3rd channel but it was all just getting to big a mod i wanted to get it in the water i had a few idea's on what i could use the 3rd channel for be interested to see what you come up with
00Dan Style
#2783
Senior Member
Join Date: Mar 2005
Location: shellharbour, AUSTRALIA
Posts: 510
Likes: 0
Received 0 Likes
on
0 Posts
RE: RC Surfer
yeah could be interesting but gotta get what ive started now done, got it all cut out new motor mount mount is glassed in, new bent shaft ready to go in. alot more cutting than i thought when i started, but have lowered the motor by nearly 10 mm, (fit bigger batts,lower the cg)shaft comes out nearly 0 angle hopefully get it done late tonight for test tomorrow if weather allows. photos later.
later dudes
fishstyle
later dudes
fishstyle
#2785
Senior Member
Join Date: Apr 2010
Location: OUTLAWS CLUBHOUSE OZ
Posts: 1,205
Likes: 0
Received 0 Likes
on
0 Posts
RE: RC Surfer
Hi Guys,
Swells Up!
But.......
Wind is not ideal and tide is eating the sandhills away.............
Had a look this morning but give it a miss.
Might go for a cruise early and try again.
Sea ya.
JIMI
Swells Up!
But.......
Wind is not ideal and tide is eating the sandhills away.............
Had a look this morning but give it a miss.
Might go for a cruise early and try again.
Sea ya.
JIMI
#2787
Senior Member
Join Date: Mar 2005
Location: shellharbour, AUSTRALIA
Posts: 510
Likes: 0
Received 0 Likes
on
0 Posts
RE: RC Surfer
Gave the new mods a test today but so frigging windy
really not sure if better or not yet, I hope so cause it was a lot of cutty sandy glassy gluey etc etc etc (enough to make skowowski happy)
will hopefully give it another go on Friday maybe the wind will die down and rain will stop and the waves will be perfect lol!
Have a good one
really not sure if better or not yet, I hope so cause it was a lot of cutty sandy glassy gluey etc etc etc (enough to make skowowski happy)
will hopefully give it another go on Friday maybe the wind will die down and rain will stop and the waves will be perfect lol!
Have a good one
#2788
Member
Join Date: Jan 2006
Location: Nazare, PORTUGAL
Posts: 32
Likes: 0
Received 0 Likes
on
0 Posts
RE: RC Surfer
Hi guys,
Had a great surf at the same spot from my last video, got it was almost the same but less windy and with a bigger fin. It was a blast, some reverses, one roll, and managed to go inside a huge hollow barrel, but a bounce made it jump and it sinked it's nose. I think if that wave wasn't so close to the shore it would come out of it perfectly. this board seems to hold it's line really well as long as the wave doesn't bounce... I think there's good things to come with this board!
No footage today, a friend of mine borrowed my camera for a week...
Had a great surf at the same spot from my last video, got it was almost the same but less windy and with a bigger fin. It was a blast, some reverses, one roll, and managed to go inside a huge hollow barrel, but a bounce made it jump and it sinked it's nose. I think if that wave wasn't so close to the shore it would come out of it perfectly. this board seems to hold it's line really well as long as the wave doesn't bounce... I think there's good things to come with this board!
No footage today, a friend of mine borrowed my camera for a week...
#2793
Senior Member
Join Date: Apr 2010
Location: OUTLAWS CLUBHOUSE OZ
Posts: 1,205
Likes: 0
Received 0 Likes
on
0 Posts
RE: RC Surfer
Hi Shred Crew,
Still waiting for some quality, did look better today but still a bit wobbly.
Looks like Friday could be on at "The Fence".
Sea ya.
JIMI
Still waiting for some quality, did look better today but still a bit wobbly.
Looks like Friday could be on at "The Fence".
Sea ya.
JIMI
#2794
Senior Member
Join Date: Oct 2010
Location: Goldcoast QLD, AUSTRALIA
Posts: 343
Likes: 0
Received 0 Likes
on
0 Posts
RE: RC Surfer
gday lads
been busy over the past couple of days building a board again while im off work.
i got a board a while ago but it had rusted nuts ,when i tryed to screw them out the other day the bolts turned inside the plastic and broke the towers. lucky i had old hull laying round so i chopped the broken ones out and glassed in some new ones. hopefully it holds up :- /.
Shes ready to roll tho.....im running a 1800kv with 3s with 35mm prop with this one to see if i can get a long run time. done pretty much every mod apart from any tail or rail mods.hopefully she surfs like my 2s board did.
ill try get some footage of its first run ,if my missus will come with her canon 550d dslr.
#2795
Member
Join Date: Jan 2006
Location: Nazare, PORTUGAL
Posts: 32
Likes: 0
Received 0 Likes
on
0 Posts
RE: RC Surfer
Great waves this morning, still a bit too windy but who cares! I'm really starting to pull out the manouvers, even with not so perfect conditions, but still a great training for when the good waves come!
There's more in the afternoon, bats charging up!!
There's more in the afternoon, bats charging up!!
#2799
Senior Member
Join Date: Apr 2010
Location: Lahaina,
HI
Posts: 432
Likes: 0
Received 0 Likes
on
0 Posts
RE: RC Surfer
damit
you guys are lucky we got 6in. waves with no waves insight . cant wait to see your pics and vids john maui
jimi that avatar thing was a hard , but i findly got it.
you guys are lucky we got 6in. waves with no waves insight . cant wait to see your pics and vids john maui
jimi that avatar thing was a hard , but i findly got it.
#2800
Member
Join Date: Jan 2006
Location: Nazare, PORTUGAL
Posts: 32
Likes: 0
Received 0 Likes
on
0 Posts
RE: RC Surfer
Bad luck this afternoon after some bad waves, some water got in, and after swapping a new bat, the esc came out with that beautiful bad smelling smoke... ouchhhhhh!!!
One more week without surfing...
Good luck for your next outings guys!
One more week without surfing...
Good luck for your next outings guys!