ok i bought this nitro car from this guy and its a nitro rustler and it has a pull start and it also had a glow plug ingitor so i got fuel today and put the glow plug ignitor on the spark plug and pulled and it wouldnt start then i started doing it alot and i did it alot and it still didnt start. How am mi supposed to get the fuel to the engine with this tank theres no primer button. Is that my problem??/

Sorry im new to nitro

Dude don't worry about the question that is how we all learn. This will help, put your finger over the end of the exhaust and pull the rip cord till the fuel begins to travel up the fuel line. Be careful not to do it to long or you might foul the glow plug (not spark plug) or hydro lock the motor. Follow the link to help you further.
Good luck
[link=http://www.traxxas.com/products/nitro/nrustler/trx_nrustler_views.htm]Owners Man.[/link]

[link=http://www.traxxas.com/products/nitro/nrustler/trx_nrustler_parts-list.htm]Parts list[/link]

[link=http://www.traxxas.com/products/nitro/nrustler/trx_nrustler_views.htm]Exploded Views[/link]

[link=http://www.traxxas.com/support/troubleshooting/nitro/nrustler/trx_trouble_nrustler.htm]Trouble Shooting tips[/link]

[link=http://monster.traxxas.com/forumdisplay.php?s=&forumid=14]Traxxas Rustler Forum[/link]

monster gt has a primer line.(install on fuel line and press it to prime) and ofna has 1 to a fuel filter/primer(mix)

^ do that. but make sure its enough that went thought the engine. if it diesnt work check your engine if it has comppression

yea, just put ur thumb over the exhaust, and pull the cord a couple times, and you'll see the fuel run up into the carb, chuck on ur glow warmer, and pull