Handling
01-15-2003 | 01:38 PM
#2
Senior Member
My Feedback: (1)
Joined: Jul 2002
Posts: 1,228
Likes: 0
Received 0 Likes
on
0 Posts
From: Atlanta, GA
Hop ups
Thats a question that can have lots of answers, we could be here all day on that one.
If you can elaborate as to what you think is not working right then maybe the group can address the particular issue.
Dbow
If you can elaborate as to what you think is not working right then maybe the group can address the particular issue.
Dbow
01-15-2003 | 04:27 PM
#3
My Feedback: (11)
Handling
You need to buy various shock oils and springs.
Post what your car is doing (include surface you are running on) along with key info of your car's current setup (ride height, spring tension, shock oil, camber, caster, akerman, toe in/out, tires, etc).
Post what your car is doing (include surface you are running on) along with key info of your car's current setup (ride height, spring tension, shock oil, camber, caster, akerman, toe in/out, tires, etc).
01-15-2003 | 05:42 PM
#4
Senior Member
Joined: Oct 2002
Posts: 1,156
Likes: 0
Received 0 Likes
on
0 Posts
From: San Jose,
CA
Handling
True to that. This question can have all sorts of answer. Be specific and maybe we can suggest.
I also asked this question a while back. See the post here
http://www.rcuniverse.com/showthread...164&forumid=42
I also use Hudy setup tools so that I can setup the car having the same settings on all corners..
I also asked this question a while back. See the post here
http://www.rcuniverse.com/showthread...164&forumid=42
I also use Hudy setup tools so that I can setup the car having the same settings on all corners..
