RC10 T4 problem
#1
Thread Starter
Junior Member
Joined: Jun 2007
Posts: 1
Likes: 0
Received 0 Likes
on
0 Posts
From: , CA
Hi Everyone,
I am returning to RCing about 16 years after putting down my last radio and I picked up an RC10 T4 yesterday. Been having a blast until I curbed it earlier today at about half throttle. Now when I let off the throttle, the rear wheels lock up and the car skids to a halt. Not sure where to start with diagnosing this problem as so many things can go wrong when you curb...
Any ideas or comments are greatly appreciated!
I am returning to RCing about 16 years after putting down my last radio and I picked up an RC10 T4 yesterday. Been having a blast until I curbed it earlier today at about half throttle. Now when I let off the throttle, the rear wheels lock up and the car skids to a halt. Not sure where to start with diagnosing this problem as so many things can go wrong when you curb...
Any ideas or comments are greatly appreciated!
#2
Senior Member
Joined: Apr 2007
Posts: 155
Likes: 0
Received 0 Likes
on
0 Posts
From: Dunedin, FL
WEll Im assuming you bought a RTR since its only been one day and your already running it. Thats why I always say build your own from scratch and then if you have a problem you know how to fix it cause you built it. I recently built a FActory Team T4 and I love it.
Can you turn the wheels with your hand? Where is the binding? Can you turn the pinion and spur gear freely? Does it run normally until you let off the throttle?
Can you turn the wheels with your hand? Where is the binding? Can you turn the pinion and spur gear freely? Does it run normally until you let off the throttle?



