Replacing Shocks!
06-09-2003 | 01:34 AM
#1
Thread Starter
Junior Member
Joined: Jun 2003
Posts: 4
Likes: 0
Received 0 Likes
on
0 Posts
From: Vegas Baby!
Replacing Shocks!
I have an HPI Nitro RS4(about a year old), and I just bought some Hot Bodies Shocks/Springs, and I wanna know how to remove the HPI units, any tips?
03-31-2004 | 03:20 PM
#2
Junior Member
Joined: Mar 2004
Posts: 6
Likes: 0
Received 0 Likes
on
0 Posts
From: UK, UNITED KINGDOM
RE: Replacing Shocks!
I also need to know how, they are connected by a ball/socket type joint at top and bottom, do you just have to force them out? seems very hard if thats is so...
03-31-2004 | 05:24 PM
#3
Senior Member
My Feedback: (6)
Joined: Dec 2003
Posts: 806
Likes: 0
Received 0 Likes
on
0 Posts
From: Huntsville, AL
RE: Replacing Shocks!
The shocks should just unscrew from the shock towers...if that's what your asking. And as far as the shock itself, those pieces also unscrew. the balls should stay in the shock itself... I hope I am helping. [
]
]
03-31-2004 | 09:54 PM
#4
Senior Member
Joined: Jun 2003
Posts: 614
Likes: 0
Received 0 Likes
on
0 Posts
From: QueretaroQueretaro, MEXICO
RE: Replacing Shocks!
on the rs4 the balls dont unscrew ith the shocks you have to snap them off, try not to do this too much because you will create slop
