DF02 Problem
08-14-2009 | 02:28 PM
#1
Thread Starter
Member
Joined: Jul 2009
Posts: 55
Likes: 0
Received 0 Likes
on
0 Posts
From: Oxford, UNITED KINGDOM
DF02 Problem
Ive just rebuilt my gravel hound after splitting chassis now ive put it back together which i thought was correct but now there's another proble.........back wheels will move freely in different directions to each other but when place on the floor and try to push it forward / backward they become jammed?
08-14-2009 | 03:36 PM
#2
Thread Starter
Member
Joined: Jul 2009
Posts: 55
Likes: 0
Received 0 Likes
on
0 Posts
From: Oxford, UNITED KINGDOM
RE: DF02 Problem
Was a strange solution to this..................all came down to the motor
jammed and seized when on the car but worked fine (or atleast i thought) when held in hand....was an old standard 540 can which is now going to be binned
case closed
jammed and seized when on the car but worked fine (or atleast i thought) when held in hand....was an old standard 540 can which is now going to be binned
case closed
