RCU Forums

RCU Forums (https://www.rcuniverse.com/forum/)
-   RC Car General Discussions (https://www.rcuniverse.com/forum/rc-car-general-discussions-179/)
-   -   look at this engine (https://www.rcuniverse.com/forum/rc-car-general-discussions-179/2800604-look-engine.html)

losixxx-nt 03-24-2005 11:53 AM

look at this engine
 
http://cgi.ebay.com/ws/eBayISAPI.dll...964141532&rd=1

i love how small that thing is how much hp is that thing:D

RYANO218 03-24-2005 01:00 PM

RE: look at this engine
 
I have one of those sitting on my workbench. I am not sure of the power but i know that it is designed for airplane use.

traxxspirit 03-24-2005 07:28 PM

RE: look at this engine
 
those are sometimes on free flying airplanes

gubbs3 03-24-2005 11:33 PM

RE: look at this engine
 
They definitely only for airplane use. I believe they will turn about a 3 inch prop.

Cummins 03-25-2005 01:31 AM

RE: look at this engine
 
Ok, heres the ifo (I have one also):

They are 0.049 engines designed to run on 0% Methanol.
They do not have a carburettor as such, they have no throttle control, it is merely start it and leave it till the fuel runs out.
They do not have a tuned pipe, they have a few holes at the top of the cylinder, this makes them very noisiy, much noisier than my 0.15 in my on-roader.
They heat up like crazy, this is because the un-burned oil and extra stuff that usually gets spurted out the stinger on a car gets spurted out the holes of the cylinder which covers the cylinder, effectively reducing cooling.

ralf-ss 03-26-2005 09:42 PM

RE: look at this engine
 
my brother has three of those, he got them from a friend but none of them will run. you can still buy those even though they are discontinued, i saw one last summer in a hobby store for $40 cnd

Cummins 03-27-2005 06:46 AM

RE: look at this engine
 
$40! You got ripped off. My dad bought it for me when he was over in america, it was a fully funstional control line. Cost him $30!

Nitro_Evader_Basher 03-27-2005 01:49 PM

RE: look at this engine
 


ORIGINAL: Cummins

$40! You got ripped off. My dad bought it for me when he was over in america, it was a fully funstional control line. Cost him $30!
he said $40 Canadian, thats like $32 american or 17.50 Pounds

Cummins 03-27-2005 02:50 PM

RE: look at this engine
 
oops, my bad. :eek:

Nitro_Evader_Basher 03-27-2005 02:53 PM

RE: look at this engine
 
meh, honest mistake

Cummins 03-27-2005 02:56 PM

RE: look at this engine
 
Nitro_Evader_Basher, why aren't you using your other account (the one with the funny avatar?)

losixxx-nt 03-27-2005 10:29 PM

RE: look at this engine
 
and that one went for 12.51

jakjr 03-27-2005 10:34 PM

RE: look at this engine
 
I bet theyre real powerhouses LOL.

Cummins 03-28-2005 03:27 AM

RE: look at this engine
 
They are actually! :) i think I'm gonna build a fan powered car with mine, or a nitro hairdryer! :)

itspuddingtime00 03-28-2005 09:09 PM

RE: look at this engine
 

ORIGINAL: Cummins
or a nitro hairdryer! :)
[X(][X(] Do you realize how totally awesome that would be. You could put a nitro engine in there and a blower that blows air over it. It will spit all of the excess fuel in your hair and act as gel, cutting the time it takes to do your hair in half. You should think about getting it patented.

losixxx-nt 03-28-2005 11:07 PM

RE: look at this engine
 

ORIGINAL: itspuddingtime00


ORIGINAL: Cummins
or a nitro hairdryer! :)
[X(][X(] Do you realize how totally awesome that would be. You could put a nitro engine in there and a blower that blows air over it. It will spit all of the excess fuel in your hair and act as gel, cutting the time it takes to do your hair in half. You should think about getting it patented.
lol :):)

Cummins 03-29-2005 03:05 AM

RE: look at this engine
 


ORIGINAL: itspuddingtime00


ORIGINAL: Cummins
or a nitro hairdryer! :)
[X(][X(] Do you realize how totally awesome that would be. You could put a nitro engine in there and a blower that blows air over it. It will spit all of the excess fuel in your hair and act as gel, cutting the time it takes to do your hair in half. You should think about getting it patented.
Yeah, what a great idea! You could also make the cover removeable so it also acts as a hair clipper as well, so you can cut, gel and dry your hair all at once, I shall call it:
The 3 in 1 Nitro Hair styler ("Cause your worth it!").

I could make million! I could be rich, rich, RICH!!!!!!!!!!!! [sm=sunsmiley.gif][sm=RAINFRO.gif][sm=sunsmiley.gif]

cenracer1 03-29-2005 08:06 AM

RE: look at this engine
 
I have a box full of these at home... They were indeed from control line airplanes... they were meant to run for about a minute then stop... the fuel tank is built into the backplate and mixture is controlled by the single needle... They were a ***** to start and were extremely noisy and dirty... I have fond memories of them growing up.. I even had one in a helicopter, which I still have... maybe 30 years old... probably still works... As far as hp... probably not mote than 1/10 hp...

cenracer1 03-29-2005 08:07 AM

RE: look at this engine
 
I have a box full of these at home... They were indeed from control line airplanes... they were meant to run for about a minute then stop... the fuel tank is built into the backplate and mixture is controlled by the single needle... They were a pain to start and were extremely noisy and dirty... I have fond memories of them growing up.. I even had one in a helicopter, which I still have... maybe 30 years old... probably still works... As far as hp... probably not mote than 1/10 hp...

Cummins 03-29-2005 08:27 AM

RE: look at this engine
 
A helicopter!? I would like to see that!

cenracer1 03-29-2005 10:38 AM

RE: look at this engine
 
sorry for the double post.... hit buttom twice... The Helicopter goes straight up for about 15 seconds to about 200-300 feet then the motor stops and it autogyro's down .... It worked real well as long as there was no wind... I lost a few as a child.... saved this one..

Cummins 03-29-2005 12:10 PM

RE: look at this engine
 
Ha Ha! Does yours still work? If it does, I would love to see a video of it.

RCBOZO 03-29-2005 12:21 PM

RE: look at this engine
 
http://www.estesrockets.com/Basic_049_Engine1050.html

https://www.estesrockets.com/cgi-bin...s.cgi?view,424

Cox .049 $5.99 Shipped!

Cummins 03-29-2005 12:44 PM

RE: look at this engine
 
$5.99! I'm gonna get 50 of them and make a HUUUUUUUUUUUUUGE hairdryer!!!! :D

shvdcat 03-30-2005 01:29 AM

RE: look at this engine
 
1 Attachment(s)
Duratrax Maximum ST with a liquid cooled TRX 2.5


All times are GMT -8. The time now is 07:46 AM.


Copyright © 2026 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.