Solution to Stripped Screws
 

I saw this on tv the other day. it can be used when a dremel can't reach the screw. cheaper than a dremel also.

http://www.4grabit.com/Default.asp?bhcp=1

im thinkin about ordering a set.

RE: Solution to Stripped Screws
 

i've got a set
they don't work all that well
and they are generally
too large for 90%
of the screws used in rc's

RE: Solution to Stripped Screws
 

You don't have to order them you should be able to find them at most any hardware store, Home Depot, Lowes, etc. They are also go by Easy Out.

Dave

RE: Solution to Stripped Screws
 

i bought i set at sears to try and remove a screw from a rc part. It was like 40 bux and they where all to big to work on rc screws so i just returned it.[:@]

RE: Solution to Stripped Screws
 

why would you think that they were for rc scrwes?

RE: Solution to Stripped Screws
 

I was going to get a set but since they are all too big for the screws on rc's i will wait til i need it for something else.

RE: Solution to Stripped Screws
 

Well if you use the right tool in the first place you wouldn't need one of those........

RE: Solution to Stripped Screws
 

They'll work on alot of screws.......You just have to Use the drill side & be sure you Drill the Screw enough for the other end to Grab the screw....

http://media.putfile.com/Removing-Striped-RC-Screws