servo comparison?
 

i have a hitech 625MG and a JR Z590mg.

trying to find specs on both to see wish is more torque and would be better for steering.

anyone have a link to compare the two?"

thanks.

servo comparison?
 

Both are good, but the 625 will have more torque and same speed.

JR Z590:
Torque: 85 oz/in (@6.0V)
Speed: .15 sec/60 deg (@6.0V)

Hitec HS-625MG:
Torque: 94 oz/in (@6.0V)
Speed: .15 sec/60 deg (@6.0V)

Not sure how much the Z590 sells for but most places sell the 625MG for $35-40.

servo comparison?
 

what is best of the best in servo's

servo comparison?
 

all high end servo are good
some will stay with futaba forever,
for me ko digital all the way

servo comparison?
 

The hitec 6 series is some SERIOUS bang for buck!

But I Was wondering..

Just getting into 1/10 onroads and whats a good servo set for that?
You know how everyone uses the 56 series for MTS all the time? Is there a popular set that you guys use for onroads?!

I guess I'm lookin for about 80 oz/.10 or something like that for steering?

ram

servo comparison?
 

I use Ko all round
stering: PDS-2143 FET
throt/brake: PDS-2144 FET

very fast, huge torque and great holding power

servo comparison?
 

Airtronics has some super fast servos that does .07 sec and can put out 120 some oz/in of torque, I forget the # (might be 94357Z) but costs $120.

servo comparison?
 

I run an Airtronics 94359 200oz/in at .10 (6V) for steering and gonna install an Airtronics 94257 110oz/in at .06 (6V) for throttle. The first one sells for $120 and the second one goes for about $105 from Nitrohouse. Both are coreless and plenty fast.