drift ideas
#5
Banned
Joined: Mar 2006
Posts: 1,417
Likes: 0
Received 0 Likes
on
0 Posts
From: Down under, AUSTRALIA
Well.. The TT-01 is about the only Entry level Chassis in that price Bracket
and is extremely noob friendly !
It works and Drifts well..
If you could expand the Budget just a little more I would reccomend the HPI Sprint 2..
About $300 Should get you one RTR..
and is extremely noob friendly !
It works and Drifts well..
If you could expand the Budget just a little more I would reccomend the HPI Sprint 2..
About $300 Should get you one RTR..
#7
Banned
Joined: Mar 2006
Posts: 1,417
Likes: 0
Received 0 Likes
on
0 Posts
From: Down under, AUSTRALIA
I know this sounds Crazy but I would never go 2nd hand, you end up buying someone elses troubles..
With Your Budget, the TT-01 will do fine, Look for a Z-Tune or Coppermix Kit..
You will still need to buy radio gear or Use the Radio gear you already have and transfer it to the TT-01
You can then look at getting a Alloy Prop shaft and Ball Bearing kit for it..
With Your Budget, the TT-01 will do fine, Look for a Z-Tune or Coppermix Kit..
You will still need to buy radio gear or Use the Radio gear you already have and transfer it to the TT-01
You can then look at getting a Alloy Prop shaft and Ball Bearing kit for it..
#8
Thread Starter
Member
Joined: Nov 2004
Posts: 77
Likes: 0
Received 0 Likes
on
0 Posts
From: , CA
is the ABS pipe the best way to go or should i buy tires...cuz im going for looks as well...so i found some rims...and can anyone help me find tires and do i need those little foam iner thingys....this is going on a traxxas 4tec..electric....getting an Associated Reedy Spec 19T Quad Magnet Motor....any more ideas?



